New version 3.4.1 released!

• Updated GeoLink Altitude Limit:
  • Altitude Limit has configurable triggering Altitude in flight.
    
  • Triggering Altitude is set by altitude from moment when the function is activated.
    
  • Behavior is similar to Rescue (Automatic) from Spirit GT/GTR.
    
  • When model will drop under configured altitude level, it will automatically engage rescue for 1.5 seconds.
    
  • Supported with GeoLink v1 and v2.
• Updated GeoLink Return to Home:
  • Hands-Free Flight when function is engaged.
    
  • Once activated model will additionally maintain altitude configured by Return Altitude parameter.
    
  • Model will start moving to Home position but at the same time will achieve desired altitude.
    
  • Supported with GeoLink v1 and v2.
• Updated GeoLink Geo-Fence function:
  • Hands-Free Flight when function is engaged.
    
  • When Geo-Fence is breached model will additionally maintain altitude configured by Return Altitude parameter.
    
  • Model will start moving to the center of geo-fence area but at the same time will achieve desired altitude.
    
  • Supported with GeoLink v1 and v2.
• New parameter GeoLink - Return Altitude:
  • New parameter for maintaining configured altitude when a GeoLink function is activated by a switch.
    
  • Used by Return to Home and Geo-Fence functions.
    
  • If configured to zero, then parameter is disabled.
    
  • Value above 25m is recommended.
    
  • Supported with GeoLink v1 and v2.
• JETI telemetry update:
  • Telemetry variable S GPS Sat is updated also when ESC telemetry is unused.
• Anti-Gravity feature:
  • Anti-Gravity feature is working also for Stabi functions.
• New HobbyWing Platinum v5 ESC telemetry:
  • Full support for HobbyWing Platinum v5 ESC telemetry.
    
  • See wiring and settings at the Wiki page.
• Spirit Settings - Setup Wizard:
  • Goblin 500 - 580 preset was updated to support the latest SAB Goblin models.
    
  • Goblin 700 - 800 preset was updated to support the latest SAB Goblin models.

Update for the Spirit units, JETI integration is available in our Download section.

WARNING: Please be aware that GeoLink's function Altitude Limit behavior has changed and Return Altitude parameter need to be configured.

_________________
Spirit System developer

Update for Wifi-Link and for JETI integration is available for download from our download section

_________________
Spirit System developer