|
It is currently Thu 21. Nov 2024 20:07:21
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 5 posts ] |
|
| Author |
Message |
|
Renzo
|
 Posted: Thu 31. Oct 2024 23:07:27 |
|
Joined: Sat 05. Oct 2024 16:06:01
Posts: 12
|
|
Hallo All,
Do the 6 degrees have to be positive? in my setup Wizard I have -6 degrees is it right?thanks everyone for your help
|
|
| Top |
|
 |
|
ExCCHP
|
Posted: Fri 01. Nov 2024 1:49:32 |
|
Joined: Wed 12. Jan 2022 17:00:01
Posts: 71
Location: British Columbia, Canada
|
|
Which blade are you using to take the angle measurement?
Are the blades aligned with the boom?
AFAIK you should always take measurements with the blade over the nose of the canopy.
|
|
| Top |
|
|
|
HeliMLM
|
Posted: Fri 01. Nov 2024 7:43:00 |
|
Joined: Tue 10. Mar 2020 14:36:22
Posts: 370
|
|
it does not matter if you take the blade over the boom or over the nose. and depending on the pitch gauge you are using and how it was zeroed and which blade you are using, there could be + or - 6°.
_________________
cheers
Michael
|
|
| Top |
|
|
|
Renzo
|
Posted: Fri 01. Nov 2024 12:38:18 |
|
Joined: Sat 05. Oct 2024 16:06:01
Posts: 12
|
|
Tank for your help...i can go fly:)
|
|
| Top |
|
|
|
franz88
|
Posted: Fri 01. Nov 2024 13:17:51 |
|
Joined: Sun 08. Jan 2023 14:32:43
Posts: 289
|
|
don't get confused
It doesn't mean 6 degrees of cyclic
6 degrees in the geometry
and in cyclic ring supported degrees from your mechanics helicopter (about 10 degrees)
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: Amatrix and 16 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
