It is currently Fri 22. Nov 2024 12:53:21

All times are UTC + 1 hour





Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 19. Feb 2015 15:00:14 
Offline

Joined: Tue 30. Dec 2014 7:50:36
Posts: 135
hi thomas!
can you help me with the right connection with DS16 and a Jeti R9 receiver?
with the DS16 and the Jeti RSat2 it goes away!
not with the R9 receiver ...
as I have the spirit, DS16 and R9 connect?

greeting frank


Top
 Profile  
 
PostPosted: Thu 19. Feb 2015 15:24:06 
Offline

Joined: Wed 11. Feb 2015 15:52:05
Posts: 5
Attachment:
uploadfromtaptalk1424355839998.png
uploadfromtaptalk1424355839998.png [ 799.34 KiB | Viewed 2677 times ]
Attachment:
uploadfromtaptalk1424355730147.png
uploadfromtaptalk1424355730147.png [ 364.52 KiB | Viewed 2677 times ]


Top
 Profile  
 
PostPosted: Thu 19. Feb 2015 15:24:39 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hi,

you can connect the receiver in few ways - PWM, PPM, UDI or EX Bus.
Which one do you want?

For UDI you can use SAT port, for EX Bus EXT port. Be sure your receiver is updated else EX Bus will not work probably.

For UDI you have to select SRXL/SUMD receiver type.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 19. Feb 2015 16:52:00 
Offline

Joined: Tue 30. Dec 2014 7:50:36
Posts: 135
ok,
I have everything connected as recommended.
UDI set in the transmitter, set in spirit to SRXL / SUMD, then RUD put on the SAT in the receiver, BEC from Kosmik plugged into the AUX from Spirit.
I have no servo motion ... ???


Top
 Profile  
 
PostPosted: Thu 19. Feb 2015 16:55:46 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
What firmware version is in the receiver?
UDI should work out of the box with default Jeti settings.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 19. Feb 2015 16:57:14 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
I can try R9 EX receiver with Jeti + UDI in few minutes.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 19. Feb 2015 17:02:39 
Offline

Joined: Tue 30. Dec 2014 7:50:36
Posts: 135
It is the 3.23 Version.


Top
 Profile  
 
PostPosted: Thu 19. Feb 2015 17:06:15 
Offline

Joined: Tue 30. Dec 2014 7:50:36
Posts: 135
in my diabolo I have installed the RSat2.
no problem!


Top
 Profile  
 
PostPosted: Thu 19. Feb 2015 17:15:56 
Offline

Joined: Wed 11. Feb 2015 15:52:05
Posts: 5
http://www.jetiforum.de/index.php/forum ... 4377#37805


Top
 Profile  
 
PostPosted: Thu 19. Feb 2015 18:19:47 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
For me R9 EX is working out of the box.
Only you have to do is to configure UDI serial connection in your receiver. Then you should see it is running on SAT port.
And finally configure SRXL/SUMD receiver type and save the settings.

Then, after restart all should work.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .