It is currently Sat 21. Sep 2024 6:50:23

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Stabilization mode
PostPosted: Thu 05. Feb 2015 9:32:08 
Offline

Joined: Sun 28. Dec 2014 22:39:47
Posts: 82
Hello,

just a small question about the stabilization mode. In the manual you have stated, that also the stabilization mode needs a negative gyro gain in order to be activated.

But why do I see a different behaviour on the ground with and without stabilization mode without a negative gyro gain? I have configured bank 0 without stabilization and rescue and bank 2 with stabilization.
If I tilt the helicopter in bank 0 the swashplate gets tilted but then returns to the normal position. In bank 2 the swashplate gets also tilted but then stays in this position until the heli is tilted back to the normal position.

Does that mean that the stabilisation is activated even without a negative gyro gain?

I don't really use the stabilization mode - it's just for interest.

Regards and many thanks


Top
 Profile  
 
 Post subject: Re: Stabilization mode
PostPosted: Thu 05. Feb 2015 11:20:53 
Offline

Joined: Sun 01. Feb 2015 19:10:22
Posts: 51
I think its normal for the swash to return to the normal position while in normal mode

_________________
Compass 7hv v2 spirit pro. Compass 7hv v2 spirit pro. Trex 550fl spirit. Heli-x sim. NeXt sim. Pheonix sim. Fms p51 1400 spirit. Coolice 2400watt psu. Pl6. Icharger 206. Peter lynn twister 5.6. Dx9. TM1000.


Top
 Profile  
 
 Post subject: Re: Stabilization mode
PostPosted: Thu 05. Feb 2015 11:39:14 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12385
Hello,

stabilisation is only activated with negative gyro gain.
So described behavior is correct.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Stabilization mode
PostPosted: Thu 05. Feb 2015 13:37:55 
Offline

Joined: Sun 28. Dec 2014 22:39:47
Posts: 82
Hello,

but why is the behaviour of bank 0 and bank 2 (without negative gyro gain) different on the ground? If the the stabilization is not activated in bank 2 I would have expected a similar behaviour of the two banks.

Regards


Top
 Profile  
 
 Post subject: Re: Stabilization mode
PostPosted: Thu 05. Feb 2015 13:50:33 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12385
It depends on your settings.
If all is working correctly in the flight, then there is no problem.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Stabilization mode
PostPosted: Thu 05. Feb 2015 17:48:54 
Offline

Joined: Thu 31. Jul 2014 21:27:22
Posts: 215
If you are referring to the swashplate leveling on the ground, it is because the Spirit senses the vibrations created by the rotor and will return the swash plate back to level if the main rotor is not turning. It is a very smart safety feature so you don't have accidental tip overs on spool up.

This is not to be confused with self level mode.


Top
 Profile  
 
 Post subject: Re: Stabilization mode
PostPosted: Thu 05. Feb 2015 18:21:45 
Offline

Joined: Sun 28. Dec 2014 22:39:47
Posts: 82
Thanks - that I have understood. But this differs with and without stabilization (and without negative gyro gain). Try it out!

Gesendet von meinem GT-I9515 mit Tapatalk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 39 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .