I have now loaded and flown the new 1.0.25 firmware and noticed a change. When the unit does it's "initialisation complete" pitch-pump of the swashplate, my heli now only pumps the elevator servo. Has this changed, or do I have a problem?

Thanks,
Mike

Hi,

this is new feature which indicate that there is a saved log in the unit - something wrong happened during the flight.
It is described in the manual too.

When you review the log, it is cleared and initialization should be normal.

_________________
Spirit System developer

Ah, very neat - thanks.

I hit the ESC's LVC, so that was probably the problem... I'll check the log

Thanks,
Mike

I hadn't noticed a new manual .. I'll have a look for it, thanks

No problem.

_________________
Spirit System developer