It is currently Fri 22. Nov 2024 7:11:12

View unanswered posts | View active topics


Board index » English » HELI » Support

All times are UTC + 1 hour





Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
ChrisTTian667
 Post subject: [SOLVED] Bailout failed
PostPosted: Fri 03. Oct 2014 18:12:19 
Offline

Joined: Thu 28. Aug 2014 10:11:26
Posts: 31
Location: Germany / Osann-Monzel
Hey Guys,

I tried the spirit today in my trex 550. I tried the bailout for 2-3 times and it worked very well. But after a few tries, the bailout was up side down. As i activate it, the heli went down to earth. Wth?? Is it a bug in the System, or can i check some parameters?

Best regards.

P.s. Its the newest Software on the device.

_________________
Triabolo|Kosmik 200|XNOVA 4530 XTS|MKS 960/990|Spirit Pro|REX7
Diabolo BE|Kosmik 200|XNOVA 50XX Tareq|REX3
Top
 Profile  
 
ZeXx86
 Post subject: Re: Bailout failed
PostPosted: Fri 03. Oct 2014 18:19:38 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hello,

you should check pirouette optimization first as stated in the software and manual.
This is main reason why the rescue could fail. Pirouette optimization has to be configured properly.
If you are sure that this parameter is OK, then you can check other things.
For example if the unit is aligned to all axes precisely.

Don't worry, we are testing it for few years.

If all is correct, it will work very well.

_________________
Spirit System developer
Top
 Profile  
 
ritchieicu
 Post subject: Re: Bailout failed
PostPosted: Fri 03. Oct 2014 23:26:13 
Offline

Joined: Thu 28. Aug 2014 18:17:19
Posts: 90
How are you powering the unit?
Top
 Profile  
 
ChrisTTian667
 Post subject: Re: Bailout failed
PostPosted: Fri 03. Oct 2014 23:39:17 
Offline

Joined: Thu 28. Aug 2014 10:11:26
Posts: 31
Location: Germany / Osann-Monzel
Hey, i will check piroette optimization tomorrow morning. Ty

The unit is powered via 2 cables from rx. And the rx is connected via 2 power lines from an external 12/20A bec. So, i think that should be fine.

_________________
Triabolo|Kosmik 200|XNOVA 4530 XTS|MKS 960/990|Spirit Pro|REX7
Diabolo BE|Kosmik 200|XNOVA 50XX Tareq|REX3
Top
 Profile  
 
ritchieicu
 Post subject: Re: Bailout failed
PostPosted: Sat 04. Oct 2014 9:40:48 
Offline

Joined: Thu 28. Aug 2014 18:17:19
Posts: 90
ChrisTTian667 wrote:
Hey, i will check piroette optimization tomorrow morning. Ty

The unit is powered via 2 cables from rx. And the rx is connected via 2 power lines from an external 12/20A bec. So, i think that should be fine.

Chris, let us know how it goes please
Top
 Profile  
 
Jman841
 Post subject: Re: Bailout failed
PostPosted: Sat 04. Oct 2014 13:56:08 
Offline

Joined: Thu 31. Jul 2014 21:27:22
Posts: 215
Make sure the unit:

- initialized on a flat stable surface
- Adequate power to support a huge cyclic/collective movement on all servos
- Piro Optimization is configured correctly
- Pre-flight checks are done
- The swash direction is going the right way on the bench, if not you have to go into negative values on the pitch slider for rescue.
Top
 Profile  
 
ChrisTTian667
 Post subject: Re: Bailout failed
PostPosted: Sat 04. Oct 2014 21:49:28 
Offline

Joined: Thu 28. Aug 2014 10:11:26
Posts: 31
Location: Germany / Osann-Monzel
I think pyro optimization was wrong. But since i crashed today, i have to wait till tuesday for the parts. Then i will give it another try.

Ty guys!

_________________
Triabolo|Kosmik 200|XNOVA 4530 XTS|MKS 960/990|Spirit Pro|REX7
Diabolo BE|Kosmik 200|XNOVA 50XX Tareq|REX3
Top
 Profile  
 
ChrisTTian667
 Post subject: Re: Bailout failed
PostPosted: Wed 22. Oct 2014 8:52:57 
Offline

Joined: Thu 28. Aug 2014 10:11:26
Posts: 31
Location: Germany / Osann-Monzel
It was the pyro optimization.
I forget to double check it after i reverted the roll.

So, sorry guys, that was my fail!! :(

_________________
Triabolo|Kosmik 200|XNOVA 4530 XTS|MKS 960/990|Spirit Pro|REX7
Diabolo BE|Kosmik 200|XNOVA 50XX Tareq|REX3
Top
 Profile  
 
ritchieicu
 Post subject: Re: Bailout failed
PostPosted: Wed 22. Oct 2014 9:29:39 
Offline

Joined: Thu 28. Aug 2014 18:17:19
Posts: 90
Thanks for the update Chris
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » English » HELI » Support

All times are UTC + 1 hour


Who is online

Users browsing this forum: Google [Bot] and 36 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .