It is currently Wed 13. Nov 2024 7:57:13

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 28. Oct 2024 9:37:12 
Offline

Joined: Sun 08. Sep 2024 20:28:53
Posts: 6
Hello,

I'm using the Spirit GT in combination with a Radiomaster rp3-h. When powering up the helicopter, half of the times my sticks and switches do nothing. After powering up i get all the right beeps. Swash is moving up en down and then nothing works. I have to unplug the lipo to try again. It's totaly random if it works or not. Sometimes is have to unplug and replug 4 times in a row. Very frustrating. I have tryed unplugging and repluging the rp4-h with the spirit gt already powered up and that way it always works well. TX is a Ranger micro in a tx16s. Tx, rx and spirit unit are all up to date with the firmware.
Can you please help me out?
Friso


Top
 Profile  
 
PostPosted: Wed 30. Oct 2024 15:22:19 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12438
Hello,

could you please share your wiring?

We have identical setup here with no issues, so we can check also settings. Do you use a bufferpack?

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 31. Oct 2024 3:30:51 
Offline

Joined: Wed 15. May 2024 11:00:21
Posts: 19
https://manual.spirit-system.com/index. ... sFire_CRSF

CRSF has seperate rx/tx pins, so for your telemetry problems it sounds like one of the two is not connected right. Not sure if this also causes your other issue.

P. S. @ZeXx86 the wiring page of the manual is missing the CRSF receiver example, I could only find it on this seperate page.


Top
 Profile  
 
PostPosted: Mon 11. Nov 2024 9:39:11 
Offline

Joined: Sun 08. Sep 2024 20:28:53
Posts: 6
ZeXx86 wrote:
Hello,

could you please share your wiring?

We have identical setup here with no issues, so we can check also settings. Do you use a bufferpack?


I do not use a buffer pack. On the rp3-h i have the output marked tx connected to the Rud S. Rx is connected to Ele/pit/ail S.
The + and - output is connected to the Rud + and -.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .