ZeXx86 wrote:
Thank you.
I can say only that I highly do not recommend to fly with this model now.
The vibration level is insane. Basically the level is so high that with the most other gyros it will be not possible to even lift off (even with half the level).
There are strong resonant vibrations that must be resolved.
The problem is tail mechanics.
Zex,
Thank you ,
Can you help me understand how it’s only 29% vibration on the logger , but so high on the Y axis at the same time ?
Also on the bench the vibration is less than half , around 110 on the y axis .
Also , could you share what a normal level would be both on the Y axis and as a percentage on the data logger ?
In the mean time I will continue to dig and see if I have missed anything.
Thanks!