|
Setup, GTR, Piuma heli, Jeti ds12, new Hobbywing 150 platinum. I have Throttle cut setup. When switched on, I have no collective. And servos move up and down erratically every few moments. I have aileron, elevator control. Connected to GTR w/computer shows collective movement on servo screen when throttle hold is on. Collective set up for throttle hold in ds12. Graph shows movement, standard curve. Idle up 1 collective works. But, idle up 2 and 3 also prevent collective movement, with throttle cut off. I'm at a loss. I have set up different rpm for each mode and it works fine. Rpm telemetry on ds12. I went back thru my setup menu, servos all correct hz and freq. Rechecked collective,,all smooth operations. End of setup, ready to fly. I did not mention it before, but, every few tests everything works perfect. Collective perfect all 3 flight modes. Operate throttle hold, perfect collective. Then all problems start again. Checked all wiring.
|
