|
It is currently Sun 10. Nov 2024 23:12:10
|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 5 posts ] |
|
Author |
Message |
buttles
|
Posted: Sun 19. May 2024 18:31:59 |
|
Joined: Tue 16. Jun 2015 14:37:10 Posts: 156
|
Hi, playing around with Rescue (Normal) today. Tried the Rescue Duration to see how it performed. Then tried to un-tick it but it stays checked. Hopefully something simple to fix but am stumped!! A basic search didn't come up with anything. Thanks
|
|
Top |
|
|
Mattes61
|
Posted: Mon 20. May 2024 11:17:49 |
|
Joined: Wed 21. Dec 2016 15:13:38 Posts: 566 Location: Germany
|
Hello, have you really saved the un-ticked configuration or only changed but not safed ? Sometimes you just forget that in a hurry - Another thing have you banks activatet then un-tick them in all banks -
Regards
|
|
Top |
|
|
buttles
|
Posted: Mon 20. May 2024 12:48:44 |
|
Joined: Tue 16. Jun 2015 14:37:10 Posts: 156
|
The autosave function is active but I also backed that up with a manual save. Alas, the same. Been through all 3 banks and it also doesn't clear the tick. Tomas will have to confirm how that particular function is handled I think
|
|
Top |
|
|
Mattes61
|
Posted: Mon 20. May 2024 13:24:27 |
|
Joined: Wed 21. Dec 2016 15:13:38 Posts: 566 Location: Germany
|
Hello, one thing will work, I have it no tried but it should - Disable all settings (function) in all three banks so that you have no stabi - save this settings in your FBL - then power up new the FBL, then there must be stabifunction disabled in all banks - Then set all banks again as you want and safe it in your FBL - start the FBL new (new power up) an look if all setting are like you wanted -
If that doesn't work then there must be something wrong and then Tomas has to look what kind of problem that can be -
Hint: I personally dislike autosave and save all manually but that's only my humble opinion -
Regards
|
|
Top |
|
|
buttles
|
Posted: Tue 21. May 2024 7:43:34 |
|
Joined: Tue 16. Jun 2015 14:37:10 Posts: 156
|
Thanks for your suggestions. It's not my Heli so can't access it at the moment. We did disable the Stabi functions, save then re-enable Stab normal. This is using the latest software in an old Red unit.
|
|
Top |
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
|
Who is online |
|
Users browsing this forum: Bing [Bot] and 6 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|