Hi all
Im having issues with a set up. Ive built a 450 out of parts. Mostly 450 pro parts but 215mg kst servos Spirit fbl and hobbywing 40amp v4 esc.
Everything is programmed, leveled, 0 pitch at 50% etc etc. The issue i have is that when it spools up, channel 3 servo pulls to the right and there is poor tail authority. I'm running Stabi scale with 60% neg in the gyro to make it active but it is not working that well when i am just moving the heli by hand to check its functioning.
Do you think it could be the spirit unit as its relatively old.
Any advice welcome.
Ta