Spirit System • View topic

It is currently Fri 22. Nov 2024 13:02:10

View unanswered posts | View active topics

Board index » English » HELI » Support

All times are UTC + 1 hour

Servo Freq

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

dkpodder

Post subject: Servo Freq

Posted: Sat 11. Nov 2023 11:23:38

Joined: Wed 10. Aug 2022 8:45:54
Posts: 9

Hi,

Upgrading servos to KST BLS915 V8, I'm just about to try a 760us cyclic setup.
The servo programming tool takes Upper/Neutral/Lower settings, what is the upper and lower numbers?
Do anyone know if theese servos do more than 333Hz, and do I need to select the 20_k in the servo programming tool?

Best regards

Top

Mattes61

Post subject: Re: Servo Freq

Posted: Sat 11. Nov 2023 12:58:25

Joined: Wed 21. Dec 2016 15:13:38
Posts: 566
Location: Germany

Hello,
this servo can only 333Hz and neutral signal at 1520 µs , why do think it can 760 µs ?
With the KST1-Tool you can only set the neutral position and the left and right endpoints.
The only information I found for KST1-Tool is in German, look at this:

Attachment:

Screenshot 2023-11-11 124112.png [ 135.87 KiB | Viewed 458 times ]

Servoinformation:

Attachment:

Screenshot 2023-11-11 130220.png [ 227.4 KiB | Viewed 458 times ]

Top

dkpodder

Post subject: Re: Servo Freq

Posted: Sat 11. Nov 2023 13:55:14

Joined: Wed 10. Aug 2022 8:45:54
Posts: 9

Mattes61 wrote:

Attachment:

The attachment Screenshot 2023-11-11 124112.png is no longer available

Servoinformation:

Attachment:

The attachment Screenshot 2023-11-11 130220.png is no longer available

Specs makes me think so:

Attachment:

IMG_2746.jpeg [ 350.74 KiB | Viewed 455 times ]

Attachment:

IMG_2747.jpeg [ 389.52 KiB | Viewed 455 times ]

Top

ZeXx86

Post subject: Re: Servo Freq

Posted: Sat 11. Nov 2023 14:23:35

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442

With 760us servo is not faster actually. Technically it could have lower precision.
Theoretical speed improvement is with increased frequency. But here changing neutral value will not help. So you can leave 1520 and 333Hz.

_________________
Spirit System developer

Top

Mattes61

Post subject: Re: Servo Freq

Posted: Sat 11. Nov 2023 14:26:38

Joined: Wed 21. Dec 2016 15:13:38
Posts: 566
Location: Germany

Hello,
really interesting, different languages different information ?! Unbelievable !
I find that strange...

In the german manual there is no information about the change of mid signal...

I think the only secure information is directly from KST or maybe an other user has this type of servos and changed the mid signal to 760µs -

Top

dkpodder

Post subject: Re: Servo Freq

Posted: Sat 11. Nov 2023 14:35:54

Joined: Wed 10. Aug 2022 8:45:54
Posts: 9

ZeXx86 wrote:

ok, wouldn’t 760/560 be an improvement to 1520/333?
I know it would cause less resolution, but would the increased freq be worth anything?

Top

ZeXx86

Post subject: Re: Servo Freq

Posted: Sat 11. Nov 2023 14:43:48

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442

Yes, 560Hz will help. I can see this is supported too now.

_________________
Spirit System developer

Top

dkpodder

Post subject: Re: Servo Freq

Posted: Sat 11. Nov 2023 14:54:11

Joined: Wed 10. Aug 2022 8:45:54
Posts: 9

ZeXx86 wrote:

Yes, 560Hz will help. I can see this is supported too now.

Thank you. So you would suggest going for 760/560?
Wat will the low and high value be when going for 760us?

Top

Page 1 of 1

[ 8 posts ]

Board index » English » HELI » Support

All times are UTC + 1 hour

Who is online

Users browsing this forum: No registered users and 43 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: