It is currently Thu 31. Oct 2024 5:08:12

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sat 15. Apr 2023 14:31:56 
Offline

Joined: Sat 15. Apr 2023 3:26:40
Posts: 3
Hi, Could someone please point me in the right direction for the setup of a Robbe / Schluter rocking servo setup? One servo is for the collective, one for the roll, and one for the elevator. The mix is done mechanically. The model was set up with a Futaba CGY750 but the OLED display has failed so I can not read the settings. I will be using a GTR with a Jeti TX. I have tried all the different swashplate types but none seems to suit this type of setup.

-------------------------------

So after changing the swash plate to 90deg CCPM and setting the phasing to -45 deg (CCW rotation) the head all seems to move in the correct direction (90deg out of phase for a 4-blade head).

Now to continue the setup

Please chime in if you have any further information on these setups.

Thanks


Top
 Profile  
 
PostPosted: Sun 11. Aug 2024 19:02:44 
Offline

Joined: Sun 03. May 2015 16:56:24
Posts: 45
This question has been raised by a relative of mine. Did you succeed in your settings ?

For the SPIRIT support team, any suggestion for such a case will be much appreciated.


Top
 Profile  
 
PostPosted: Thu 29. Aug 2024 13:24:08 
Offline

Joined: Sun 03. May 2015 16:56:24
Posts: 45
Nobody seems to know, even ZeXx86 :o Maybe there is no solution or the question is rather difficult but it is the first time since 9 years I own Spirits (with a great satisfaction) that I see a technical question direct related to the product unanswered. Thanks anyway ;)


Top
 Profile  
 
PostPosted: Fri 30. Aug 2024 14:59:44 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12432
Hello,

answer is in the original post.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sun 01. Sep 2024 22:23:41 
Offline

Joined: Thu 21. Apr 2022 1:34:02
Posts: 58
I created a solution with a Bavarian Demon unit some years ago with a 1 servo 1 function set-up. I will see whether I still have the file, but was a long time ago!
The pilot was a tool maker and subsequently changed the control to a direct control with good effect. However, did work fine in the original form.
I will see if I can find the original tonight.
Although the mechanical set-up looks very different, the ultimate behaviour is no different from any other current direct control arrangement. You still have to achieve the standard cyclic and collective actions!
Just look at what input achieves those actions and go from there.


Top
 Profile  
 
PostPosted: Sat 07. Sep 2024 13:21:24 
Offline

Joined: Sun 03. May 2015 16:56:24
Posts: 45
Many thanks to all of you. I will report these precious advices.


Top
 Profile  
 
PostPosted: Tue 17. Sep 2024 1:15:37 
Offline

Joined: Thu 21. Apr 2022 1:34:02
Posts: 58
I have tried to find that file and can't currently see it.
As I remember, I took no particular different view of the servo functions, just review what each servo in this format actually tries to achieve - aileron, elevator, collective.
Then just apply the normal programming logic. This did work fine, although, watch out for slop, etc.
Andy


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .