Hello,
Following problem, in the Spirit GT the diagnostic tab all channels are working all in the right directions for example elevator down and elevator up, all ok -
In the diagnostic.lua all inputs are working fine (direction), however the direction of the elevator channel is wrong !
elevator up is elevator down and elevator down is elevator up - as said in Spirit-Settings all directions are right !
The programming of the script is probably wrong here -
For information, that was the only channel which must be inverted in the transmitter -
But when I think here is mabe the direction wrong and it must the channel inverted then I have possibly an problem -
If only the directions of the inputs of the transmitter are queried here, then that is simply not correct - it would be best to correct the error or simply not make this Lua script available at all, because it's just not right-

Regards
Mattes61