Hallo !
Ich kann natülich auch Deutsch, ich komme ja aus Deutschland
Was heißt das konkret, wenn Du den Satelliten in den AR 6610T einsteckst geht nichts mehr ?
Das verstehe ich dann nicht, bei mit hat das sonst immer so funktioniert - als alleinige Verbindung zum Spirit ist nur mit dem Jeti Integrationskabel nehme ich an, das ist auch so richtig -
Sobald Du einen Sat an den AR 6610T anschließt sollte die Verbindung zum Spirit über den Port 1 des AR6610T stattfinden, dann sollte das wirklich funktionieren -
Mit dem Binden kannst Du noch folgendes probieren, dazu braucht man fast drei Hände, mit einer Hand beide Bind-Buttons drücken und dann die Batterie in einen Port vom AR6610T stecken, zum Beispiel Port 1 - Alles sollte blinken, dann mit dem Sender binden unter system und Binden etc., dabei genügend Abstand einhalten, dann sollte das auch funktionieren - sonst fällt mir nichts weiteres ein, vielleicht hast Du noch ein anderes Spirit zum Testen?
Gruß
Matthias