|
It is currently Fri 22. Nov 2024 18:15:03
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 6 posts ] |
|
| Author |
Message |
|
Jackbraddogs
|
 Posted: Sun 19. Sep 2021 17:41:06 |
|
Joined: Fri 06. Aug 2021 15:06:21
Posts: 7
|
|
Hi, I was going to wait for spirit to give me tandem mode with 6 servos, but could not wait any longer.
I converted my swash plates to 4 servos type and assumed all would be straight forward!
But alas no.
Pitch,aileron, elevator servos all worked but virtually no rudder.
I have been flying tandems for a couple of years (Vario with BD3sx) but decided that they were getting too heavy for me to carry etc.
Now onto Hirobo and Spirit - hope I haven’t made a mistake. Never any trouble with BD3sx and rudder.
Please advise
Thanks
|
|
| Top |
|
 |
|
ZeXx86
|
Posted: Mon 20. Sep 2021 7:40:40 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Hi,
can you let me know what behavior you can see on the bench when moving with rudder stick?
Is swashplte moving?
_________________
Spirit System developer
|
|
| Top |
|
|
|
Jackbraddogs
|
Posted: Mon 20. Sep 2021 9:55:45 |
|
Joined: Fri 06. Aug 2021 15:06:21
Posts: 7
|
|
Hi, Thanks for getting back to me. Both swash plates move in different directions (as they should) but virtually no movement. Blades move 0.7degrees max from end to end.
Hope this helps.
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Mon 20. Sep 2021 10:34:25 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Please make sure that Sensor/Rotation Rate is high enough for Rudder.
And also that Advanced/Cyclic Feed Forward has a decent value.
Also make sure that in the Diagnostic tab Rudder channel is moving in the full extent +/- 100%
_________________
Spirit System developer
|
|
| Top |
|
|
|
Jackbraddogs
|
Posted: Mon 20. Sep 2021 17:29:30 |
|
Joined: Fri 06. Aug 2021 15:06:21
Posts: 7
|
|
Hi, All done and checked. I also lengthened the servo rods etc to increase the throws and it is now acceptable and should be ok.
Thanks Again
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Mon 20. Sep 2021 20:17:48 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
It is also possible you will have to increase Rudder End-Points.
This can help a lot too.
_________________
Spirit System developer
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 6 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 5 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
