It is currently Sun 10. Nov 2024 22:35:05

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Fri 06. Aug 2021 18:19:46 
Offline

Joined: Fri 06. Aug 2021 18:11:38
Posts: 1
Hi,

I have upgraded firmware on my Spirit Pro with latest and it doesn't anymore start up normally.
Goes into red Led blinking mode and I can't anymore connect via USB nor via futaba TX.

Only if I enter in recovery mode and flash again same firmware it works, but if power off Spirit , it doesn't initiate when I power it up.

I note in addition that the serial number is not identified and shows ff-ff-ff-ff-ff-1 and if I try to upgrade the firmware again before power off the spirit, it says that the spirit server is offline and that try later. I try with other module and works fine and connects to server without issues

Tried the old firmware but same issue, i have never had this issue with any spirit modules.

Can i get help to fix this?


Top
 Profile  
 
PostPosted: Sun 08. Aug 2021 4:24:23 
Offline

Joined: Sun 08. Aug 2021 3:50:06
Posts: 1
Hello and a Moin to everyone,

I have a problem with my new Spirit GT, the first time I came in contact with my PC, the Spirit wanted an update, and then I clicked on yes.
That was a mistake, nothing works from now on, unfortunately nothing has been recognized since then.
The software no longer recognizes the serial number, in recovery mode I also get the firmware 3.3.1 from 6/26/2021 loaded, after the completion the message is successful.
The LED has changed from flashing to a steady light, and then nothing more happens.
The FBL does not restart if the power supply is disconnected and switched on again, the LED only flashes quickly.
What am I doing wrong? Is this a case now for the manufacturer to pack up and send back? Do you have another idea?

Greetings Stefan


Top
 Profile  
 
PostPosted: Sun 08. Aug 2021 8:41:06 
Offline

Joined: Wed 09. Jun 2021 22:09:08
Posts: 15
Location: Schweiz AG
Gammarex wrote:
The FBL does not restart if the power supply is disconnected and switched on again, the LED only flashes quickly.


Link: viewtopic.php?f=20&t=4761&start=30

please have a look here, there could also be your mistake

Greetings Gery


Top
 Profile  
 
PostPosted: Mon 09. Aug 2021 11:17:04 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12436
Hello,

I will send you private message with instruction how to resolve the problem.
It should be resolved easily. Thank you for your patience.

The reason for such problem is usually in the USB driver. But fortunately we have made few improvements in the software so it should work with all USB drivers well, hopefully.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .