It is currently Fri 22. Nov 2024 1:26:54

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 12. Jul 2021 14:06:29 
Offline

Joined: Thu 01. Jul 2021 11:48:21
Posts: 11
Good Afternoon

Configuring the Spririt RS as "" rescue ( normal ) "" my helicopter doesn't turn, so that the skids are facing down to earth.
Instead the Goblin stays upside down and is sinking slowly downward...

What did I do wrong ?

transmitter DC 24 Jeti
Spririt RS SW 3.3.1

Thanks
Kind Regards

p-51d


Top
 Profile  
 
PostPosted: Mon 12. Jul 2021 16:26:55 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hello,

probably Rescue is not activated at all.
Or your basic settings are configured incorrectly.

I recommend to verify if all servo arms are in the middle when you enable Servos/Subtrim (tuning) menu.
At the same time swashplate should be leveled. And also there must be zero pitch between main blades.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Tue 13. Jul 2021 9:37:24 
Offline

Joined: Thu 01. Jul 2021 11:48:21
Posts: 11
Hi ZeXx86

Thanks for your answer; I've to check on your points and let you know ;
It probably takes a while as we'll have very heavy rains the whole week...

Kind Regards
Roland


Top
 Profile  
 
PostPosted: Tue 13. Jul 2021 10:17:19 
Offline

Joined: Thu 01. Jul 2021 11:48:21
Posts: 11
Hi ZeXx86

in the setup of the GeoLink there is a check box under "settings" : "POSITION HOLD"
Do I override the SPIRIT RS cfg when checked ?
( this would explane the staying of the helicopter upside down )

In the SPIRIT RS setting there can be set the priority of the sticks ( range 0-16 )
When I want to have at least half of the controls ( i.e. the pitch ) what number should I choose ?
Does " 16 " mean full control ?

Thanks
Kind Regards

Roland


Top
 Profile  
 
PostPosted: Wed 14. Jul 2021 13:18:13 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hi,

when Position Hold feature from GeoLink is used, model will remain at the single position. But first you have to enable it. It does not matter if Rescue is enabled or disabled. It will not move in horizontal axis.

If you want to be sure no other function is affecting Rescue, please turn everything else off and retry.

It is possible that you set Acro Delay parameter. If it is not 0, then model will fly like with Rescue (Acro) for period configured in this parameter. Then it will return to skids down when period will pass.

Stick Priority is affecting how much you can control the model (Cyclic) with sticks during rescue maneuver. Default value (6) should be good. Usually pilot should not need to control model at all during rescue. Default value is recommended if you are not sure what is good for you.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .