It is currently Fri 22. Nov 2024 12:17:00

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 30. Jun 2021 15:06:48 
Offline

Joined: Sun 11. Oct 2020 21:48:21
Posts: 36
I have just received my brand new Spirit GT! Thanks!

I have a question:
Is there a way to combine the automatic rescue with stabilization?
I mean: fly with stabilization, but if go down below the minimum altitude trigger auto rescue?
Because right now I see that Automatic rescue is under STABI tab, but with no stabilization parameters


Top
 Profile  
 
PostPosted: Fri 02. Jul 2021 9:16:48 
Offline

Joined: Sun 18. Apr 2021 16:54:57
Posts: 216
gjhernandez wrote:
I have just received my brand new Spirit GT! Thanks!

I have a question:
Is there a way to combine the automatic rescue with stabilization?
I mean: fly with stabilization, but if go down below the minimum altitude trigger auto rescue?
Because right now I see that Automatic rescue is under STABI tab, but with no stabilization parameters


Hi, I'm starting now to setup the basically , Rescue normal to see how it works, and later install the GeoLink,
but have some doubts , you use Spektrum ?


Top
 Profile  
 
PostPosted: Fri 02. Jul 2021 13:33:55 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
gjhernandez wrote:
I have just received my brand new Spirit GT! Thanks!

I have a question:
Is there a way to combine the automatic rescue with stabilization?
I mean: fly with stabilization, but if go down below the minimum altitude trigger auto rescue?
Because right now I see that Automatic rescue is under STABI tab, but with no stabilization parameters

Hello,

rescue mode is rather for these flying in a normal mode.

In case you want to use stabilisation all the time and have rescue to engage automatically it is needed to install Spirit GeoLink module.
With this, it will work. Rescue (Automatic) must be turned off and Altitude Limit function from GeoLink turned On.

It is possible tu use Rescue (Automatic), but not as a guard when flying with Stabilisation mode.
In the future it could be possible.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 02. Jul 2021 14:38:21 
Offline

Joined: Sun 18. Apr 2021 16:54:57
Posts: 216
ZeXx86 wrote:
gjhernandez wrote:
I have just received my brand new Spirit GT! Thanks!

I have a question:
Is there a way to combine the automatic rescue with stabilization?
I mean: fly with stabilization, but if go down below the minimum altitude trigger auto rescue?
Because right now I see that Automatic rescue is under STABI tab, but with no stabilization parameters

Hello,

rescue mode is rather for these flying in a normal mode.

In case you want to use stabilisation all the time and have rescue to engage automatically it is needed to install Spirit GeoLink module.
With this, it will work. Rescue (Automatic) must be turned off and Altitude Limit function from GeoLink turned On.

It is possible tu use Rescue (Automatic), but not as a guard when flying with Stabilisation mode.
In the future it could be possible.


Hi thank's for the quick reply, I see in the manual that the transmitter switches can be adjust by % for put more functions with one channel?
Also on the transmitter it's only possible with the end point to manage the endpoint travel limits, also I not see the possibily to put two function with one switch ( channel)

Still not works the basic Rescue Pitch mode without GeoLink ( for this I select channel 7 on a self returning switch).
I connect the GeoLink to see how it works and looks good, but with the Stabi Function enable its very dificult to select the options, I like to have this options selectable by diferent switches.

Also it works now I take a channel for the DeoLink Altitude Limit and a other channel for the stabi, but The most
inportant for me , I like to program the Returning Home in case of a Failsafe.

I select the Tail Gyro Gain for the software because I need the channel 5, but I see some funny that I still not understand, why when I adjust in the software the Tail Gyro gain, when I go unther - the swahplates moves up?
What have the tail setup to do with the swashplate? :cry:


Top
 Profile  
 
PostPosted: Fri 02. Jul 2021 15:26:49 
Offline

Joined: Sun 11. Oct 2020 21:48:21
Posts: 36
ZeXx86 wrote:
gjhernandez wrote:
I have just received my brand new Spirit GT! Thanks!

I have a question:
Is there a way to combine the automatic rescue with stabilization?
I mean: fly with stabilization, but if go down below the minimum altitude trigger auto rescue?
Because right now I see that Automatic rescue is under STABI tab, but with no stabilization parameters

Hello,

rescue mode is rather for these flying in a normal mode.

In case you want to use stabilisation all the time and have rescue to engage automatically it is needed to install Spirit GeoLink module.
With this, it will work. Rescue (Automatic) must be turned off and Altitude Limit function from GeoLink turned On.

It is possible tu use Rescue (Automatic), but not as a guard when flying with Stabilisation mode.
In the future it could be possible.


Thank you for your reply:

Another question:
What is the difference between the Geolink altitude limit (hard deck) vs the new GT hard deck (auto rescue)
which one has better precision? Geolink or GT sensors?
I plan to use this as a safety net when doing hard-3D flight


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .