ZeXx86 wrote:
...I am sure we will find it soon
yes... and the RS unit is showing it's own life or at least strange behaviour
i've done a test-flight with the unit mounted in the Logo 550SE and everything seemed good so far... just a really slight elevator bounce-back that i maybe even have not noticed during tests after conversion from Neo. so i landed, stopped motor, opened integration on TX and changed elevator filter from 2 to 3, saved, closed integration and restarted motor. bounce-back was perfectly gone and no other odd effects at all.
all seemed perfect - i just wanted to check cyclic roll rates before landing. full elevator flip backwards was consistent and ok. then i tried a roll right (aileron full right)... before the end of the first half roll the heli immediately rolled back (aileron left) by itself and leveled perfectly (elevator axis too) as if stabilization was activated (but it is not configured)... i was still on full aileron right and already negative pitch when this started. i quickly let the stick center and checked if i have control back and yes - full control. i just landed quickly and spooled down.
at home, on the bench: no Spirit log available, nothing special in telemetry log. unfortunately i am logging DS-12 P2+P4 only - but they show perfectly what i was flying (or at least wanted to fly).
nb: rescue normal via channel #8 is configured... but no stabilisation mode or whatsoever. even no tuning channels anymore. only channels 1-8 in Tx and Spirit.
