It is currently Sun 24. Nov 2024 11:36:52

All times are UTC + 1 hour





Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sun 23. Aug 2020 6:24:58 
Offline

Joined: Thu 16. Jul 2020 6:54:09
Posts: 7
Can someone please help, Ive followed instructions on connecting uni cable to futaba sbus2 port and red wire to ele/ail port. Brown and orange to rud port and I got no telemtry, no control of servo. Please help. Im using Align BL80A esc, futaba 16sz transmitter and futaba 7008sb receiver. If someone can help. I've spent all day trying different ways of connection and no good.


Top
 Profile  
 
PostPosted: Sun 23. Aug 2020 17:23:00 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hello,

please check this page:
http://manual.spirit-system.com/index.p ... _Telemetry

Then do not forget to add additional cable for powering the receiver. For example between CH1 port (RX) and AUX2 (Spirit) port.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 24. Aug 2020 13:43:54 
Offline

Joined: Thu 16. Jul 2020 6:54:09
Posts: 7
Hi, tried connecting normal servo wire from 8sb(rx) to aux (unit) also ch1 ( rx) to aux (unit) still no good. Im running 3.4.1 firmware on unit. Does that matter at all? Also I have external bec that I plugged into rx, would that interfere?


Top
 Profile  
 
PostPosted: Mon 24. Aug 2020 14:33:30 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hello,

first it is needed to make Futaba telemetry to work.
So that you will see at least telemetry values from Spirit - vibrations/RPM.
Is this the case?

Then you can continue with ESC Telemetry. Please note ESC must be updated to the latest firmware (but not for VBAR).

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 24. Aug 2020 23:20:51 
Offline

Joined: Thu 16. Jul 2020 6:54:09
Posts: 7
I'm lost. Cause I followed everything for futaba telemetry setup as per spirit instructions. But when I connect the uni wires (red in ele/ail/pit) brown and yellow in rud port of unit it doesnt even move my servos. Its only when I change the yellow with red that I can get movent of servos, but still no telemetry.


Top
 Profile  
 
PostPosted: Tue 25. Aug 2020 13:59:54 
Offline

Joined: Thu 16. Jul 2020 6:54:09
Posts: 7
Any chance of making a video or photo instructions on this? Cause that would help alot of people.


Top
 Profile  
 
PostPosted: Tue 25. Aug 2020 14:46:25 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hello,

Telem UNI wire shouldn't be connected at the ELE/PIT/AIL.
It should be connected at the SAT port.

You are doing two different things:
1. Futaba Telemetry
2. HobbyWing ESC telemetry

First from all Futaba telemetry must work. For this you do not need ESC or Telem UNI.
I recommend to make it work first. Then HobbyWing telemetry will be easy.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 26. Aug 2020 0:31:19 
Offline

Joined: Thu 16. Jul 2020 6:54:09
Posts: 7
Ok. How do I make futaba telemetry work? Do I need sensors bought separatly? Or do I follow instruction on spirit system website that says (To make futaba telemetry work, you need frysky integration cable........) Cause thats what I did and when I plugged the integration cable in after modification instructed from spirit guide for futaba, I got no telemetry and no movement from servo.


Top
 Profile  
 
PostPosted: Wed 26. Aug 2020 7:17:32 
Offline

Joined: Tue 16. Jun 2015 14:37:10
Posts: 156
ZeXx86 wrote:
Hello,

Telem UNI wire shouldn't be connected at the ELE/PIT/AIL.
It should be connected at the SAT port.

You are doing two different things:
1. Futaba Telemetry
2. HobbyWing ESC telemetry

First from all Futaba telemetry must work. For this you do not need ESC or Telem UNI.
I recommend to make it work first. Then HobbyWing telemetry will be easy.


Just check that info Tomas, Step 3, Wiring has the split cable going into the last two ports??

And is the Align ESC actually supported?!


Top
 Profile  
 
PostPosted: Wed 26. Aug 2020 9:47:57 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
You need to just proceed according Futaba Telemetry guide. Nothing more is needed. For now please forget about your ESC. Without Futaba Telemetry working, the rest is meaningless.

Yes, you absolutely need FrSky integration cable with a small modification as described in the Futaba Telemetry guide.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 39 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .