|
It is currently Sun 24. Nov 2024 10:24:53
|
View unanswered posts | View active topics
| Author |
Message |
|
heli_5200
|
 Posted: Mon 17. Aug 2020 11:40:58 |
|
Joined: Mon 17. Aug 2020 11:13:17
Posts: 19
|
|
Hello Unisens does not work for me on the Spirit RS at port E1.
The port in the RS is on EX bus.
With my Jeti Rex6 I have to set it to Jetibox / Sensor so that the sensor was recognized.
That doesn't work with the RS, it just has
EX bus
EX bus input / backup or
PPM
Now I have to take the Ext and unfortunately the connector of the sensor has to be split.
It's not that nice.
Jeti DS-12 software 5.03 Spirit RS Firmware 3.1.0
greeting Heli
|
|
| Top |
|
 |
|
ZeXx86
|
Posted: Tue 18. Aug 2020 8:21:57 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Hello,
E1 can be configured to JETIBOX/Sensor in the Device Explorer/REX-RS.
Please set this option, then it should work in the same way as with EXT port.
EXT port is configured for JETIBOX/Sensor permanently.
E1 is configured to JETIBOX/Sensor by default actually.
_________________
Spirit System developer
|
|
| Top |
|
|
|
Franky13
|
Posted: Tue 18. Aug 2020 13:35:44 |
|
Joined: Tue 30. Dec 2014 7:50:36
Posts: 135
|
|
Hello,
I do not get any telemetry data either. YGE sapphire,
REX-RS and DS16.
I have connected port 1 to the YGE controller
Everything was copied into the device directory as described.
It's just strange that it always worked with the same components in the Spirit 2 and SpiritPro ...
Greeting
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Tue 18. Aug 2020 13:48:14 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Port must be configured to JETIBOX/Sensor otherwise it will not work. Also you have to set JETI Telemetry in the ESC, not YGE telemetry.
If you would use Spirit ESC telemetry, then it is YGE telemetry and also wiring is different.
_________________
Spirit System developer
|
|
| Top |
|
|
|
Franky13
|
Posted: Tue 18. Aug 2020 14:04:29 |
|
Joined: Tue 30. Dec 2014 7:50:36
Posts: 135
|
|
I have set JetiExBus in the YGE controller!
I have set E1 EXBus in the Spirit RS!
In the DS16 transmitter I copied the Rex-RS folder in the device.
nevertheless I do not get any telemetry data displayed in the DS16!
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Tue 18. Aug 2020 14:06:59 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
No, please set JETIBOX/Sensor to E1 port.
_________________
Spirit System developer
|
|
| Top |
|
|
|
Franky13
|
Posted: Tue 18. Aug 2020 14:22:58 |
|
Joined: Tue 30. Dec 2014 7:50:36
Posts: 135
|
|
ok, changed to JetiBox/Sensor.
No telemetry ...
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Tue 18. Aug 2020 14:33:43 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
We will make a guide. Certainly it will work.
_________________
Spirit System developer
|
|
| Top |
|
|
|
heli_5200
|
Posted: Tue 18. Aug 2020 16:43:33 |
|
Joined: Mon 17. Aug 2020 11:13:17
Posts: 19
|
|
Hello,
today E1 placed on JetiBox / Sensor.
Telemetry with the Unisens is now working.
thank you
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Tue 18. Aug 2020 16:59:13 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
You are welcome.
_________________
Spirit System developer
|
|
| Top |
|
|
 |
Who is online |
 |
Users browsing this forum: Google [Bot] and 63 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
