It is currently Sat 23. Nov 2024 15:42:42

View unanswered posts | View active topics


Board index » English » HELI » Support

All times are UTC + 1 hour





Post new topic Reply to topic  Page 2 of 3
  [ 29 posts ]  Go to page Previous  1, 2, 3  Next
  Print view Previous topic | Next topic 
Author Message
alex4orly
 Post subject: Re: New DFC Swashplate
PostPosted: Sat 18. Jul 2020 10:36:48 
Offline

Joined: Wed 17. Jun 2020 0:53:45
Posts: 94
Location: Australia
ZeXx86 wrote:
Here you can find step by step guide how to make these steps perfectly precisely and correctly:
http://manual.spirit-system.com/index.p ... d_Geometry

Can you take a photo of your model? I have not seen swashplate with not adjustable push rod.
Please note I am talking about things like this (attachment).


Those are definitely adjustable, I was talking about the elevator arm, that is not a pushrod.
I will follow the link you provided here.
I was doing the swash plate leveling in the software, should I only do it by adjusting the length of the pushrods instead?

Thanks

_________________
Yesterday is history, Today is a present, Tomorrow... a dream.
Top
 Profile  
 
ZeXx86
 Post subject: Re: New DFC Swashplate
PostPosted: Sat 18. Jul 2020 12:39:30 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
arms of the swashplate shouldn't be adjusted in any way. At least with swashplate you linked.

_________________
Spirit System developer
Top
 Profile  
 
alex4orly
 Post subject: Re: New DFC Swashplate
PostPosted: Sat 18. Jul 2020 13:32:58 
Offline

Joined: Wed 17. Jun 2020 0:53:45
Posts: 94
Location: Australia
ZeXx86 wrote:
arms of the swashplate shouldn't be adjusted in any way. At least with swashplate you linked.


I followed the link to the manual you provided
1) it keeps talking about 3 servo rods, what 3 rods do I have?
2) in item 6, it says to adjust the rods to get swashplate level, until now, didn't touch the rods, just used the sub trim in the software.

So, I am not clear. To get the swashplate level at stick in the middle, do I use the software or change the rods?

Thanks

_________________
Yesterday is history, Today is a present, Tomorrow... a dream.
Top
 Profile  
 
thestructured
 Post subject: Re: New DFC Swashplate
PostPosted: Sat 18. Jul 2020 13:36:48 
Offline

Joined: Thu 24. Dec 2015 20:13:20
Posts: 157
The three linkages that connect the swashplate to your servos. Do you have a video chat service? I would be happy to video chat to better help
Top
 Profile  
 
ZeXx86
 Post subject: Re: New DFC Swashplate
PostPosted: Sat 18. Jul 2020 15:17:13 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
You have to set rods. With software you should just set servo arms to be in the middle.

_________________
Spirit System developer
Top
 Profile  
 
alex4orly
 Post subject: Re: New DFC Swashplate
PostPosted: Sat 18. Jul 2020 23:16:26 
Offline

Joined: Wed 17. Jun 2020 0:53:45
Posts: 94
Location: Australia
thestructured wrote:
The three linkages that connect the swashplate to your servos. Do you have a video chat service? I would be happy to video chat to better help


Would like that if you can, where in the world are you located? There will be a time gap between us, so we have to make an appointment.

I have Skype, Zoom and Lifesize for video chats

Looking forward to hear from you

Alex

_________________
Yesterday is history, Today is a present, Tomorrow... a dream.
Top
 Profile  
 
alex4orly
 Post subject: Re: New DFC Swashplate
PostPosted: Sat 18. Jul 2020 23:20:08 
Offline

Joined: Wed 17. Jun 2020 0:53:45
Posts: 94
Location: Australia
ZeXx86 wrote:
You have to set rods. With software you should just set servo arms to be in the middle.


Do you mean:

1) Level the swash plate with mechanical changes of the servo pushrods? OR
2) Set close to 90° by moving the servo arms, then level the swashplate with the software?

Please try to be more explicit

Thanks

_________________
Yesterday is history, Today is a present, Tomorrow... a dream.
Top
 Profile  
 
alex4orly
 Post subject: Re: New DFC Swashplate
PostPosted: Sat 18. Jul 2020 23:22:48 
Offline

Joined: Wed 17. Jun 2020 0:53:45
Posts: 94
Location: Australia
ZeXx86 wrote:
arms of the swashplate shouldn't be adjusted in any way. At least with swashplate you linked.


The swash plate DOES NOT have any adjustable arms, do you mean the push rods from the servo to the swashplate SHOULD NOT be adjusted?

Thanks

_________________
Yesterday is history, Today is a present, Tomorrow... a dream.
Top
 Profile  
 
thestructured
 Post subject: Re: New DFC Swashplate
PostPosted: Sun 19. Jul 2020 2:33:31 
Offline

Joined: Thu 24. Dec 2015 20:13:20
Posts: 157
Yes, the linkages, not the swashplate itself.


Do you have a skype?
Top
 Profile  
 
thestructured
 Post subject: Re: New DFC Swashplate
PostPosted: Sun 19. Jul 2020 2:56:48 
Offline

Joined: Thu 24. Dec 2015 20:13:20
Posts: 157
Please view this for proper swash setup.

https://www.dropbox.com/s/bna6a781v35q210/600setup?dl=0

Also; did your gartt 600 DFC head come as a set with a new main shaft as well? Because the DFC head requires a lower mainshaft than the stock main shaft. Part: h60247t
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 3
  [ 29 posts ]  Go to page Previous  1, 2, 3  Next

Board index » English » HELI » Support

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 31 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .