It is currently Sat 23. Nov 2024 17:22:48

All times are UTC + 1 hour





Post new topic Reply to topic  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 30. Jun 2020 13:57:15 
Offline

Joined: Wed 17. Jun 2020 0:53:45
Posts: 94
Location: Australia
in the special section about it, the manual says:
Please assign Throttle channel in the General/Channels at Channel 1.
But, I have channels 1, 2, 3, 4 assigned as per the manual.
So, what to do now?

Thank you

_________________
Yesterday is history, Today is a present, Tomorrow... a dream.


Top
 Profile  
 
PostPosted: Tue 30. Jun 2020 14:02:09 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 274
don't be confused by input channels ( from RX )
and output channels ( to servos )

;)


Top
 Profile  
 
PostPosted: Tue 30. Jun 2020 21:29:56 
Offline

Joined: Wed 17. Jun 2020 0:53:45
Posts: 94
Location: Australia
urgno wrote:
don't be confused by input channels ( from RX )
and output channels ( to servos )

;)


I am confused...
I was told to insert the ESC plug into AUX1 on the Spirit - this is as it is now.
The 1,2,3,4 are plugs inserted from the Spirit TO the servos : Pitch, Elevator, Ailerone, Rudder

In the software however, the Throttle channle is Unassigned, but in the drop down options there is no AUX1 to be selected, so the Throttle is Unassigned

The sticks movements are currently activating the WRONG servos
So, Not to be confused?

_________________
Yesterday is history, Today is a present, Tomorrow... a dream.


Top
 Profile  
 
PostPosted: Wed 01. Jul 2020 11:39:27 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 274
keep in mind that the CH number of the servos has nothing to do with CH numbers in the TX ;-)

first you connect the SPM4651T to spirit
then using spirit settings you choose SRXL2
then you move the sticks and change the channel assigment using the button "Channels" that is near the receiver selection
and you have to match the channels that you see in the "Diagnostic" tab

is nonsense to change the channel assignment in the TX
because some channels have some special preset

and btw VERY important is that in your TX you choose 90° swashplate ( H1 )
is the spirit that then will do all the mixing for the 120° swashplate


Top
 Profile  
 
PostPosted: Wed 01. Jul 2020 12:56:53 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
By default channel mapping with SRXL2 will require very likely no or almost no changes. So it should be plug and play, unless you will completely change radio profile. So default settings = will work immediately.
Onyl SRXL2 should be selected and Throttle channel assigned in the Channels window.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 01. Jul 2020 13:41:26 
Offline

Joined: Wed 17. Jun 2020 0:53:45
Posts: 94
Location: Australia
ZeXx86 wrote:
By default channel mapping with SRXL2 will require very likely no or almost no changes. So it should be plug and play, unless you will completely change radio profile. So default settings = will work immediately.
Onyl SRXL2 should be selected and Throttle channel assigned in the Channels window.


Sorry, the term in my mind should be ESC, becasue that stick controls two functions, motor and pitch

My ESC is plugged into AUX1, I followed the instructions, but
1) In the software it shows as unassigned, AND
2) IF I try to assign throttle to something - AUX1 is NOT an option in the drop down list

So?

Thanks

_________________
Yesterday is history, Today is a present, Tomorrow... a dream.


Top
 Profile  
 
PostPosted: Wed 01. Jul 2020 13:41:39 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 274
OT
want to point out that I am correctly receiving the reply notification ;)
/OT

alex4orly wrote:
ZeXx86 wrote:
By default channel mapping with SRXL2 will require very likely no or almost no changes. So it should be plug and play, unless you will completely change radio profile. So default settings = will work immediately.
Onyl SRXL2 should be selected and Throttle channel assigned in the Channels window.


Sorry, the term in my mind should be ESC, becasue that stick controls two functions, motor and pitch

My ESC is plugged into AUX1, I followed the instructions, but
1) In the software it shows as unassigned, AND
2) IF I try to assign throttle to something - AUX1 is NOT an option in the drop down list

So?

Thanks


is because in the spirit software, you are assigning the function of the spirit to the TX channel
not vice-versa
so in the spirit for the throttle, you just have to select channel 1
then go in diagnostic and see if moving throttle stick, make move the throttle indicator


Top
 Profile  
 
PostPosted: Thu 09. Jul 2020 9:11:03 
Offline

Joined: Wed 17. Jun 2020 0:53:45
Posts: 94
Location: Australia
urgno wrote:
OT
want to point out that I am correctly receiving the reply notification ;)
/OT

alex4orly wrote:
ZeXx86 wrote:
By default channel mapping with SRXL2 will require very likely no or almost no changes. So it should be plug and play, unless you will completely change radio profile. So default settings = will work immediately.
Onyl SRXL2 should be selected and Throttle channel assigned in the Channels window.


Sorry, the term in my mind should be ESC, becasue that stick controls two functions, motor and pitch

My ESC is plugged into AUX1, I followed the instructions, but
1) In the software it shows as unassigned, AND
2) IF I try to assign throttle to something - AUX1 is NOT an option in the drop down list

So?

Thanks


is because in the spirit software, you are assigning the function of the spirit to the TX channel
not vice-versa
so in the spirit for the throttle, you just have to select channel 1
then go in diagnostic and see if moving throttle stick, make move the throttle indicator


All good

Thanks

_________________
Yesterday is history, Today is a present, Tomorrow... a dream.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot], mainstreet and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .