|
It is currently Fri 22. Nov 2024 1:05:39
|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 4 posts ] |
|
Author |
Message |
IronHide
|
Posted: Tue 04. Feb 2020 11:45:38 |
|
Joined: Tue 08. May 2018 10:02:55 Posts: 3
|
is there anyone who use micro spirit on 500 size heli? if so; how is it so far?
|
|
Top |
|
|
ZeXx86
|
Posted: Tue 04. Feb 2020 18:41:03 |
|
|
Site Admin |
Joined: Mon 29. Apr 2013 16:06:44 Posts: 12442
|
uSpirit on 500 class helicopter shouldn't be used. It is not recommended at all.
_________________ Spirit System developer
|
|
Top |
|
|
onepiece
|
Posted: Tue 31. Mar 2020 5:06:44 |
|
Joined: Tue 31. Mar 2020 4:45:59 Posts: 1
|
Thinking about placing a uSpirit on a FLYBAR heli that swings 325mm blades. This is due to HORRENDOUSLY limited space inside the frame. Some folks might regard this as a 450 sized heli but the blades are significantly shorter than blades 500 class helis swing.
Questions:
-Will a uSpirit work in this scenario?
- If not, I would need to mount a larger Spirit flybarless unit upside down on the bottom of the frame. If mounted in this orientation using the sticky mounting pad, I suppose a very small zip tie placed through soft flexible silicone tubing loosely-to moderately snugly tightened (the zip tie) would be necessary to provide needed security against losing the unit in flight. Thoughts ? Thank you.
|
|
Top |
|
|
ZeXx86
|
Posted: Wed 01. Apr 2020 9:32:15 |
|
|
Site Admin |
Joined: Mon 29. Apr 2013 16:06:44 Posts: 12442
|
Hello,
uSpirit can handle this, but we do not recommend it because you will need 4x JST-Servo adapters and possible current requirements can be too high. Using a bigger Spirit unit will be safer for sure.
_________________ Spirit System developer
|
|
Top |
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
|
Who is online |
|
Users browsing this forum: No registered users and 7 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|