Spirit 2
R-XSR via SBUS
FrSky Horus X10S OpenTX 2.2.4 (I think)
Hobbywing 60A V4

I am unable to get any ESC telemetry data on my Horus X10S even after trying Discover New Sensors. But I do get telemetry of my FrSky S-Port mini voltage LiPo cell sensor so something seems to be working.

I also cannot get integration working. I have integration working with Lua on my other Spirit setups, so I know my TX is set up correctly for that.

Under Telemetry Settings in Spirit setup I have selected Hobbywing V4.


I have a direct connection from my HW 60A programming port to my Spirit 2’s SAT 1 port, but with the red power wire removed. I am not using a telemetry UNI cable. I’ve done this on Spirit 1 and uSpirit no problem (direct connection with red wire removed). I don’t think this is the issue because integration isn’t working either.

Also tried the SAT 2 port of the Spirit 2 but that didn’t work.

I have the FrSky integration cable between the SYS port of the Spirit 2 and the S-Port of my R-XSR. The longer side of the integration cable goes to the SYS port.

Any ideas on what to try next??

_________________
Find me on HeliFreak, username Xoexoe

Ugh Nevermind. Figured it out. User error.

My integration cable was not actually connected as I described it above. It was backward.

_________________
Find me on HeliFreak, username Xoexoe

Great, thank you for the message!

_________________
Spirit System developer