hi Kluftinger

I have the 60 amp v4 platinium Hw, it seems to go very well also in fixed wing mode (Option 1)and then with the governor enabled in the spirit.


today I will try again to use external governor,(Option2) and I see what changes. but one thing is certain that my esc manual has conflicting explanations

Thanks

Hi Kluftinger

You were right in the v4 version Hw Platinium you have to choose (Option2 Helicopter linear curve external), and then enable the governor in the spirit.but before enabling it, you need to do the throttle calibration
it is also written in the manual of spirit. The problem always remains that the Option2 explanation manual HW V.4 Platinium wrote something wrong about it Start up time.

The value "start up time" work only with elf/store governor!!!and and has no effect on the sofstart of option 2 as the manual says(see attachment)
Thanks