|
It is currently Sat 23. Nov 2024 21:05:00
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 4 posts ] |
|
| Author |
Message |
|
philipbunce
|
 Posted: Sun 21. Jul 2019 17:05:59 |
|
Joined: Sun 21. Jul 2019 17:00:32
Posts: 5
|
|
ESC wiring query on SpiritPro:
I am using the standard Align BEC speed controller (RCE-BL60G) on my Trex 500 but am not sure from the manual the best way to wire this to the Spirit Pro. The manual states that with DSMX satellites (as I am using a DX8 gen2), the throttle is to be connected to the Spirit Pro unit and so am I correct that the wire from the ESC needs to go to the Aux1 unit on my spirit pro
Sorry if this is a dumb questions
|
|
| Top |
|
 |
|
LogoX2
|
Posted: Sun 21. Jul 2019 19:56:52 |
|
Joined: Mon 02. Oct 2017 22:35:03
Posts: 81
|
|
Yes BEC would get plugged into Aux 1
|
|
| Top |
|
|
|
philipbunce
|
Posted: Mon 22. Jul 2019 19:38:48 |
|
Joined: Sun 21. Jul 2019 17:00:32
Posts: 5
|
|
thanks for this as make sense.
So when conecting the esc via the Aux1 port and with this being the the standard Align esc, given that I am using the Spektrum AR8010T receiver (connected vi SRXL port) with telem and my Dx8 gen 2 as a receiver, would i still get access to the battery voltage with this wiring or would i only get access to this if i were to use one of the 6 ESCs listed in the manual? thanks
|
|
| Top |
|
|
|
LogoX2
|
Posted: Mon 22. Jul 2019 19:46:21 |
|
Joined: Mon 02. Oct 2017 22:35:03
Posts: 81
|
|
Correct that ESC does not support Telemetry.
You could add a Spektrum Flight Pack Voltage sensor.
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
