|
It is currently Mon 25. Nov 2024 5:46:45
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 4 posts ] |
|
| Author |
Message |
|
sputnic6
|
 Posted: Tue 14. May 2019 19:54:38 |
|
Joined: Tue 14. May 2019 19:51:04
Posts: 6
|
|
I'm getting slight tail wag with the following setup:
Goblin 700 gasser
BK BLS-8005HV tail servo
rudder delay 0
rudder gain 38
Overall gain multiplier 1.0
If tired reducing the gain with no success. The mechanical is 90 degrees on the servo horn. Any help would be appreciated
|
|
| Top |
|
 |
|
sputnic6
|
Posted: Tue 14. May 2019 21:15:36 |
|
Joined: Tue 14. May 2019 19:51:04
Posts: 6
|
|
I should also mention this happens in hover at 1900rpm, 2000rpm, and 2100rpm. From what I noticed, I do not get a wag doing pitch pumps.
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Wed 15. May 2019 21:16:11 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Hello,
please try to increase Pirouette Consistency to 180 while decreasing Gyro Gain little bit.
Also using a shorter servo arm could help.
Make sure the unit is mounted really hard and can't move in any direction, especially to yaw due to vibrations.
_________________
Spirit System developer
|
|
| Top |
|
|
|
sputnic6
|
Posted: Mon 20. May 2019 15:41:22 |
|
Joined: Tue 14. May 2019 19:51:04
Posts: 6
|
|
I need to rebuild the engine. After that, I will try those settings.
Thanks
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 48 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
