It is currently Mon 25. Nov 2024 11:49:32

View unanswered posts | View active topics


Board index » English » HELI » Support

All times are UTC + 1 hour





Post new topic Reply to topic  Page 1 of 2
  [ 12 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
tdeane
PostPosted: Mon 29. Apr 2019 21:15:40 
Offline

Joined: Thu 27. Nov 2014 0:36:01
Posts: 14
Hi,

I have one of the original spirit Flybarless gyros from November 2014, I have it in an Align TREX500 and have just added a Geolink to the setup. I have everything configured but I keep getting the Geolink disconnecting and reconnecting virtually continuously every few seconds. When connected by Bluetooth I see at the bottom of the Geolink screen the following message when I press the Geolink Module option. "Connection with the Geolink is unstable" The Geolink has been calibrated and I have checked my configuration, all seems to be okay. The blue light on the unit stays solid throughout once it has acquired the satellites. There is no indication in the logs of any problem with the geolink.

Please advise me of how to proceed to get this working properly, I do not want to fly it when there obviously is a problem with the connection


Last edited by tdeane on Tue 30. Apr 2019 0:49:23, edited 1 time in total.

Top
 Profile  
 
ritchieicu
PostPosted: Mon 29. Apr 2019 21:17:03 
Offline

Joined: Thu 28. Aug 2014 18:17:19
Posts: 90
tdeane wrote:
Hi,

I have one of the original spirit Flybarless gyros from November 2014, I have it in an Align TREX500 and have just added a Geolink to the setup. I have everything configured but I keep getting the Geolink disconnecting and reconnecting virtually continuously every few seconds. On the hone connected by Bluetooth I see at the bottom of the Geolink screen the following message when I press the Geolink Module option. "Connection with the Geolink is unstable" The Geolink has been calibrated and I have checked my configuration, all seems to be okay. The blue light on the unit stays solid throughout once it has acquired the satellites. There is no indication in the logs of any problem with the geolink.

Please advise me of how to proceed to get this working properly, I do not want to fly it when there obviously is a problem with the connection
I get a similar thing even when using the usb lead

Sent from my ONEPLUS A5010 using Tapatalk
Top
 Profile  
 
LogoX2
PostPosted: Tue 30. Apr 2019 0:07:19 
Offline

Joined: Mon 02. Oct 2017 22:35:03
Posts: 81
tdeane wrote:
Hi,

I have one of the original spirit Flybarless gyros from November 2014, I have it in an Align TREX500 and have just added a Geolink to the setup. I have everything configured but I keep getting the Geolink disconnecting and reconnecting virtually continuously every few seconds. On the hone connected by Bluetooth I see at the bottom of the Geolink screen the following message when I press the Geolink Module option. "Connection with the Geolink is unstable" The Geolink has been calibrated and I have checked my configuration, all seems to be okay. The blue light on the unit stays solid throughout once it has acquired the satellites. There is no indication in the logs of any problem with the geolink.

Please advise me of how to proceed to get this working properly, I do not want to fly it when there obviously is a problem with the connection


Verify you have Firmware 2.6.1 in the Spirit and 1.0.2 in the Geo Link.
Top
 Profile  
 
tdeane
PostPosted: Tue 30. Apr 2019 0:19:07 
Offline

Joined: Thu 27. Nov 2014 0:36:01
Posts: 14
Thanks, yes I updated the firmware on both yesterday and the results are the same.



Sent from my Pixel 3 using Tapatalk
Top
 Profile  
 
ZeXx86
PostPosted: Tue 30. Apr 2019 7:25:26 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
You are talking about Bluetooth module, is the issue present also with USB interface?

_________________
Spirit System developer
Top
 Profile  
 
ritchieicu
PostPosted: Tue 30. Apr 2019 8:42:02 
Offline

Joined: Thu 28. Aug 2014 18:17:19
Posts: 90
ZeXx86 wrote:
You are talking about Bluetooth module, is the issue present also with USB interface?
Yes i have the issue with the usb interface, only when i go into the geolink tab, i normally just reboot the spirit a couple of times, i didn't take much notice until i saw this post. I have a new grey unit.

Sent from my ONEPLUS A5010 using Tapatalk
Top
 Profile  
 
tdeane
PostPosted: Tue 30. Apr 2019 11:59:45 
Offline

Joined: Thu 27. Nov 2014 0:36:01
Posts: 14
Yes it also happens with the USB interface.

Sent from my Pixel 3 using Tapatalk
Top
 Profile  
 
tdeane
PostPosted: Tue 30. Apr 2019 14:31:34 
Offline

Joined: Thu 27. Nov 2014 0:36:01
Posts: 14
[quote="tdeane"]Yes it also happens with the USB interface.

Here is a link to a video of the USB link connecting and disconnecting, I apologise for the focus issues.

https://photos.app.goo.gl/B2Eo3BDjcaB4i6xm8
Top
 Profile  
 
tdeane
PostPosted: Mon 06. May 2019 3:16:34 
Offline

Joined: Thu 27. Nov 2014 0:36:01
Posts: 14
Can I please get some advice on how to get this resolved?

Sent from my Pixel 3 using Tapatalk
Top
 Profile  
 
ZeXx86
PostPosted: Mon 06. May 2019 14:30:28 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Yes, I will send you private message.

_________________
Spirit System developer
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 12 posts ]  Go to page 1, 2  Next

Board index » English » HELI » Support

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .