Hello!
Please can somebody help me.
I am trying to setup a spirit-aero with a Durafly SlowPoke and want to be able to switch between Stabi-Mode and Disabled-Mode.
But I can find no difference in the reaction of the control surfaces to plane movement in both modes. In both modes they always tend to get back in neutral position.
Shouldn´t they stay in "steering position" until I move the plane back to straight position in Stabi-mode?

Thx in forward to any response!

Cempo

Hello,

first please make sure that you can see selected mode in the Diagnostic tab. Can you see that Stabilisation mode is engaged there?

Maybe your Global Gain is too low. Can you increase the value? This can help you to see a difference between the modes. But for the first flight I recommend to start from low gain and increase it gradually.

_________________
Spirit System developer

Hello!

Thx for Your help - Problem solved!!
Didn´t use negativ gyro gain for stabimode.

Greetings,
Cempo

Very well.
You are welcome!

_________________
Spirit System developer