It is currently Mon 25. Nov 2024 6:00:46

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sun 03. Mar 2019 9:41:45 
Offline

Joined: Fri 11. Jan 2019 12:21:15
Posts: 40
I am using an x10s with frsky os not opentx, I have adjusted end points so that the tx gyro and spirit diagnostics match, but when I change gyro in tx 1 increment equals 2 in spirit so for example if I change from0 to 10 in tx spirit goes from 0 to 20. Any idea why it is doing this ois it something I am not doing right or a setting in the tx. Still new to the brand so I may be missing something.


Top
 Profile  
 
PostPosted: Sun 03. Mar 2019 11:19:09 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hello,

please make sure that the travel range in your radio is same.
Try to set 100% Gyro Gain and verify in the Diagnostic tab what value you can see there.

You might just change travel little bit.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sun 03. Mar 2019 13:31:38 
Offline

Joined: Fri 11. Jan 2019 12:21:15
Posts: 40
ZeXx86 wrote:
Hello,

please make sure that the travel range in your radio is same.
Try to set 100% Gyro Gain and verify in the Diagnostic tab what value you can see there.

You might just change travel little bit.

100% in transmitter = 100% in diagnostic full green bar
50% in transmitter = 0% in diagnostic green bar in the middle
0% in transmitter = 100% in diagnostic no green bar
51% in transmitter =1% in diagnostic tab
52% in transmitter = 3% in diagnostic tab
53% in transmitter = 5% in diagnostic tab
54 % in transmitter = 7% in diagnostic tab
and so on.
so the endpoints are correct but the individual steps are not, 1 step in transmitter = 2 steps in diagnostic tab
Does it have something to do with that there is only 0-100 in transmitter but there is effectively 200 in spirit? 0 to 100% and 0 to -100%


Top
 Profile  
 
PostPosted: Tue 05. Mar 2019 5:45:39 
Offline

Joined: Fri 11. Jan 2019 12:21:15
Posts: 40
blarks wrote:
ZeXx86 wrote:
Hello,

please make sure that the travel range in your radio is same.
Try to set 100% Gyro Gain and verify in the Diagnostic tab what value you can see there.

You might just change travel little bit.

100% in transmitter = 100% in diagnostic full green bar
50% in transmitter = 0% in diagnostic green bar in the middle
0% in transmitter = 100% in diagnostic no green bar
51% in transmitter =1% in diagnostic tab
52% in transmitter = 3% in diagnostic tab
53% in transmitter = 5% in diagnostic tab
54 % in transmitter = 7% in diagnostic tab
and so on.
so the endpoints are correct but the individual steps are not, 1 step in transmitter = 2 steps in diagnostic tab
Does it have something to do with that there is only 0-100 in transmitter but there is effectively 200 in spirit? 0 to 100% and 0 to -100%

Is this correct for the horus x10s on frsky os?


Top
 Profile  
 
PostPosted: Tue 05. Mar 2019 8:47:20 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hello,

I am not sure but it should be possible to change the range of the channel. With OpenTX it correspond with -100 - 100% gain.

In any way it is not a problem at all. You just have to know that 50% correspond to 0%, 0% to -100% and 100% to 100%.

So flying Gyro Gain should be above 50%, probably between 60 - 80%.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Tue 05. Mar 2019 10:01:01 
Offline

Joined: Fri 11. Jan 2019 12:21:15
Posts: 40
ZeXx86 wrote:
Hello,

I am not sure but it should be possible to change the range of the channel. With OpenTX it correspond with -100 - 100% gain.

In any way it is not a problem at all. You just have to know that 50% correspond to 0%, 0% to -100% and 100% to 100%.

So flying Gyro Gain should be above 50%, probably between 60 - 80%.

Thank you ZeXx86, I didn't think it would be a problem, I will look into it further and see if I can change, but as you say it shouldn't be a problem, just need to remember that it is double the increments from the TX. At any rate have set it at 60 for now and will see how it flies.

Will frsky os and spirit integration happen soon?


Top
 Profile  
 
PostPosted: Wed 06. Mar 2019 10:25:13 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Great.

We hope that the integration will be available soon also for the Frsky OS.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .