It is currently Mon 25. Nov 2024 1:42:11

All times are UTC + 1 hour





Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 02. Oct 2018 11:06:19 
Offline

Joined: Tue 14. Aug 2018 9:11:02
Posts: 73
Hi, I have received a new Spirit pro with Geo link. Setup the spirit was ok. Geo link was updated to 1.0.2. No selection possible fields are grey shaded and only from time to tim blinking black for a 1/10sec only. Return to older software was no solution same problem. Switching Geo link off and on again with unpowering the spirit. Result no help. Back to an older software, no help. Back to newest software, no help.
What to do?
Thanks


Top
 Profile  
 
PostPosted: Tue 02. Oct 2018 12:47:05 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 274
i had this problem too and solved this way:

used spirit-settings 2.5.0 to update the geo-link to 1.0.2
then updated the spirit to 2.5.2
then updated spirit-settings to 2.5.2

whew :P


Top
 Profile  
 
PostPosted: Tue 02. Oct 2018 13:02:51 
Offline

Joined: Tue 14. Aug 2018 9:11:02
Posts: 73
I will try. Thanks.


Top
 Profile  
 
PostPosted: Tue 02. Oct 2018 13:44:25 
Offline

Joined: Tue 14. Aug 2018 9:11:02
Posts: 73
Bad luck it didn´t work as mentioned. Under software 2.5.0 ist works properly with Geo link 1.0.2. After installing software 2.5.2 it is shaded again. I can´t switch to map but sometimes to update.


Top
 Profile  
 
PostPosted: Tue 02. Oct 2018 15:53:35 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 274
have already updated the spirit too ?


Top
 Profile  
 
PostPosted: Tue 02. Oct 2018 19:32:51 
Offline

Joined: Tue 14. Aug 2018 9:11:02
Posts: 73
I habe used spirit Version 2.5.0 to update the geo-link to 1.0.2. Verlink is working properly.
then updated the spirit to 2.5.2. Verlink ist shaded out.


Top
 Profile  
 
PostPosted: Tue 02. Oct 2018 19:33:57 
Offline

Joined: Tue 14. Aug 2018 9:11:02
Posts: 73
Should reale geolink.


Top
 Profile  
 
PostPosted: Tue 02. Oct 2018 22:07:44 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 274
but did you also upgrade the spirit firmware to 2.5.2 ?
http://www.spirit-system.com/dl/fw/spirit-fw-2.5.2.4df

remember that geolink communication pass thru the spirit controller :)


Top
 Profile  
 
PostPosted: Wed 03. Oct 2018 6:31:26 
Offline

Joined: Tue 14. Aug 2018 9:11:02
Posts: 73
Yes, the problem occurs after upgrade spirit software to 2.5.2. As long as spirit has software 2.5.0 the Geolink works with the new Geolink software 1.2.1
So the problem must be within the new software for spirit.


Top
 Profile  
 
PostPosted: Wed 03. Oct 2018 7:22:27 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hello,

the new Spirit software and firmware has support for checking transmission between Spirit unit and GeoLink. If this is unreliable it should not work and should be logged in the Spirit unit.
You can review log from the Spirit unit if there is any warning or error. This should tell us where the problem is.

I recommend to re-download GeoLink firmware and then try to flash it again.

It is very important that Spirit firmware is really at 2.5.2, not 2.5.1 or 2.5.0 otherwise it will not work. And also Spirit Settings must be at 2.5.2.

If you will be unable to find where the problem is we can try to help you with Remote Desktop.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 35 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .