|
It is currently Sun 24. Nov 2024 19:26:15
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 4 posts ] |
|
| Author |
Message |
|
rolandk
|
 Posted: Thu 09. Aug 2018 8:36:02 |
|
Joined: Tue 03. Oct 2017 12:14:24
Posts: 49
|
|
Hello Tomas,
can I connect an Optipower Ultraguard at the CH0 Pin of the Spirit Pro? (The CH0 Pin is my last free pin).
Thanks a lot in advance.
With best regards
Roland
|
|
| Top |
|
 |
|
ZeXx86
|
Posted: Thu 09. Aug 2018 21:13:08 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Hello Roland,
yes, without any problem. With AUX2 it is actually the best port for this purpose.
_________________
Spirit System developer
|
|
| Top |
|
|
|
rolandk
|
Posted: Fri 10. Aug 2018 16:28:01 |
|
Joined: Tue 03. Oct 2017 12:14:24
Posts: 49
|
|
Hello Tomas,
thank You very much for the reply.
I wanted to use AUX2 for the second power supply cable from the ESC/BEC for more security (the Heli is a TREX 700).
Therefore CH0 is the ownly free port.
Do You think, it is better to use CH0 for the second power cable and AUX2 for the Ultraguard?
With best regards
Roland
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Sat 11. Aug 2018 12:49:04 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
You are welcome.
It does not matter, you will not notice any difference in flight. So you can freely use CH0.
_________________
Spirit System developer
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 60 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
