It is currently Sun 24. Nov 2024 6:15:36

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Bug in Servo Limits
PostPosted: Sun 17. Jun 2018 19:59:33 
Offline

Joined: Mon 30. Oct 2017 19:18:22
Posts: 48
i have found a Bug.

In the setup there is the point where you set the right and left servo limit for the rudder/aileron/elevator.

It was always strange why that not work as i wound. Now i found the reason.

When you set the right limit it is the left limit. And when you set the left limit it is the right limit. All the other way ;) For example you can set the right limit for rudder to zero angle. Then you think the rudder go zero angle to right. But you can see that the rudder go zero to left.

:lol:


Top
 Profile  
 
 Post subject: Re: Bug in Servo Limits
PostPosted: Mon 18. Jun 2018 7:21:50 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Isn't your problem caused by a wrong servo reversing?
Or just by wrong servo connection?

Nothing changed for long time there and all other people before you had no problem.

Also it is very dependent from which point you are looking at the model and the limits :) Same as in helicopters.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Bug in Servo Limits
PostPosted: Mon 18. Jun 2018 8:28:07 
Offline

Joined: Mon 30. Oct 2017 19:18:22
Posts: 48
i dont think that should be so, or it is really confusing :)

maybe the right an left thing is to difficult to explain.

when you set the first limit of the rudder the rudder travel in that limit. You can set now this limit. But when you are done you can see that that limit is in the other direction. I have two Spirits and there is the same problem. With Spirit Pro i dont have check it.


Top
 Profile  
 
 Post subject: Re: Bug in Servo Limits
PostPosted: Mon 18. Jun 2018 13:40:37 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
It should immediately show the limit so that control parts are moving and showing you the limit.

Are you running the latest version 1.3.0?

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .