Can the Spirit on the Spektrum Receiver 4669t and a Hobbywing regulator the battery consumption synonymous in Mha show and can be set as an alarm

Yes, it can be configured with our unofficial firmware. I can send link for it. It is nearly same as 2.4.3 but has some improvements in the Spektrum integration and telemetry.

_________________
Spirit System developer

Thanks for the super fast answer yes that would be great if you could send me the file

You are welcome.

Here is the link:
http://spirit-system.com/dl/fw/spirit-fw-2.4.6.4df

You will just need to add the Capacity telemetry menu. There the consumed capacity will be displayed.

_________________
Spirit System developer

Hello now have the software you've sent me successfully and it works synonymous with the battery consumption in telemetry. What I unfortunately can not but is the Spektrum IX12 the Flybarless on the station set there is something to note or must be an update on the spectrum

I tried the FW 2.4.6. with my DX9 and the battery consumption works fine with allert and status voice report. But the RPM reading is wrong, it shows me a value of 20 or 30 in the esc status window. ESC is a jive pro 120 FW1.13. Number of poles and gear ratio are set in with the kontronik progunit. What can i do to get correct RPM reading ?

You should set default settings for Gear Ratio/Motor Poles in your Konronik.
And also very important is to not configure this in your radio. You have to configure Gear Ratio and Sensing Divider only in the unit.

_________________
Spirit System developer

Thomas,

Can you list what is improved about the Spektrum Telemetry in this firmware? I was waiting for a few enhancements and I would like to know if they are covered.

I am currently using 2.4.4

thanks!

It is unofficial firmware that adds just support for Capacity displaying in the Capacity telemetry menu. This allows enabling alarm for consumed capacity in your radio.

_________________
Spirit System developer

Oh. I'm already getting that in 2.4.4 with the Flight Pack Telemetry option. Guess I can hold off updating.

Thanks!