It is currently Sun 24. Nov 2024 15:44:18

View unanswered posts | View active topics


Board index » English » HELI » Support

All times are UTC + 1 hour





Post new topic Reply to topic  Page 3 of 3
  [ 26 posts ]  Go to page Previous  1, 2, 3
  Print view Previous topic | Next topic 
Author Message
kgnkazanci
 Post subject: Re: Governor problem
PostPosted: Thu 12. Apr 2018 11:32:30 
Offline

Joined: Thu 06. Oct 2016 20:51:32
Posts: 61
Tinek wrote:
I spool up in normal then switch to idle up.
Idle1 flat at 80%
Idle2 flat at 90%


What's the normal curve values ?

The problem is probably at normal curve values. As far as I experienced with governor of Spirit, if normal curve exceeds the point governor engages, the governor behaves erratic.
Top
 Profile  
 
Tinek
 Post subject: Re: Governor problem
PostPosted: Thu 12. Apr 2018 13:04:09 
Offline

Joined: Mon 09. Apr 2018 16:26:17
Posts: 12
0-33-33-33-33%
Top
 Profile  
 
kgnkazanci
 Post subject: Re: Governor problem
PostPosted: Thu 12. Apr 2018 14:56:25 
Offline

Joined: Thu 06. Oct 2016 20:51:32
Posts: 61
Tinek wrote:
0-33-33-33-33%


Does it correspond to 33% at diagnostics tab at Spirit Setup?

In throttle settings, it's possible to see that the governor is engaged or not, while your throttle stick moves to 33% from 0% if travel settings are not set properly, governor could be engaged.Then it works abruptly. This is why I insisted to ask your throttle curve values, thanks..
Top
 Profile  
 
Tinek
 Post subject: Re: Governor problem
PostPosted: Thu 12. Apr 2018 15:45:34 
Offline

Joined: Mon 09. Apr 2018 16:26:17
Posts: 12
Yes, 33% in tx is 33% in diagnostic tab.
I ordered new rpm sensor—beastx version.
Top
 Profile  
 
kgnkazanci
 Post subject: Re: Governor problem
PostPosted: Thu 12. Apr 2018 16:04:11 
Offline

Joined: Thu 06. Oct 2016 20:51:32
Posts: 61
Tinek wrote:
Yes, 33% in tx is 33% in diagnostic tab.
I ordered new rpm sensor—beastx version.


I hope that it works better, good luck ;)
Top
 Profile  
 
Tinek
 Post subject: Re: Governor problem
PostPosted: Thu 12. Apr 2018 18:51:06 
Offline

Joined: Mon 09. Apr 2018 16:26:17
Posts: 12
ZeXx86 wrote:
Please try to use Governor to spool it (from idling) instead of using any other throttle curves. I believe it will help.

Today i tried again and it was working :D
Thank you for all your help.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 3 of 3
  [ 26 posts ]  Go to page Previous  1, 2, 3

Board index » English » HELI » Support

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 53 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .