Ok, not a big deal really, just need to remember to go to the last screen in the software when finished and save to the unit.
But is there any chance of having a save to unit button at the bottom of the software window or even an auto save function.
Still setting up my first spirit unit, just taking my time.
Anyway I was going through the setup with my Soko Tool and app, got all of the numbers reading where they should and unplugged the unit to check the CG, then realized I hadn't saved the new settings to the unit, the previouse FLB system I had, you had a save to unit button at the bottom of the screen and could have it auto save after each adjustment.

Now I have to go through the setup process again. I know it was my own fault and not blaming Spirit for anything, but a save button that is always there, would just be a nice feature.

On the positive side, having to do my setup again gets me more familiar with the Spirit system and software.

CTRL+S works as well (a little different than what you asked).

I find it easier than heading to the last page.

Please add a saved button next to the green/orange indicator on the software.

Or an "Unsaved changes" pop-up upon closing. I've made changes and forgot to save too many times to count, coming from MSH fbl units that auto save.

itsmillertime: That pop-up is there for very long time actually. Isn't it showing on your computer?

_________________
Spirit System developer