Spirit System • View topic - [SOLVED] Set up SPIRIT PRO

It is currently Sun 24. Nov 2024 12:57:18

View unanswered posts | View active topics

Board index » English » HELI » Support

All times are UTC + 1 hour

[SOLVED] Set up SPIRIT PRO

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

MOREAU

Post subject: [SOLVED] Set up SPIRIT PRO

Posted: Mon 01. Jan 2018 12:53:07

Joined: Sun 31. Dec 2017 9:57:30
Posts: 11

Hello,

After installation Spirit Pro on my TREX 500 / TX Futaba T8FG / Rx Futaba R617FS , when I check "channels" with Spirit Settings v2.4.3 on my computer , the screen is different with your of Spirit System Manual !
Indicator of Throttle is green on a half and i have "unassigned" for channel ?
Indicator of Pitch is green on 1/4 ?
Is this normal ?

Regards

Many thanks for your product and Happy New Year 2018

Attachments:

File comment: view FUTABA T8FG at the same time

IMG_2749.JPG [ 710.58 KiB | Viewed 844 times ]

IMG_2748.JPG [ 666.46 KiB | Viewed 844 times ]

Top

ZeXx86

Post subject: Re: Set up SPIRIT PRO

Posted: Mon 01. Jan 2018 16:05:49

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442

Hello,

you are using PWM connection which needs little bit more adjustments in the radio.
You may need to modify Travel Adjust to obtain +/- 100% on all channels.

Is the Pitch channel moving when you are moving with Pitch stick?

Throttle is unassigned, because it is not transffered by the cables. So only receiver is seeing the value. Unit does not care about throttle with PWM connection since the ESC is connected to the receiver.

Happy New Year too!

_________________
Spirit System developer

Top

MOREAU

Post subject: Re: Set up SPIRIT PRO

Posted: Mon 01. Jan 2018 20:57:43

Joined: Sun 31. Dec 2017 9:57:30
Posts: 11

Hello

Many thanks for the quick answer !

The Pitch channel is moving when I am moving with Pitch stick / see 2 pictures

More 2 pictures on diagnostic with Pitch stick on 100% and more Pitch stick on 0%

Regards

Attachments:

File comment: diagnostic when pitch stick 100%

IMG_2762.JPG [ 451.71 KiB | Viewed 796 times ]

File comment: Futaba Pitch stick 100 %

IMG_2761.JPG [ 332.11 KiB | Viewed 796 times ]

File comment: Pitch stick 100%

IMG_2760.JPG [ 338.18 KiB | Viewed 796 times ]

Top

MOREAU

Post subject: Re: Set up SPIRIT PRO

Posted: Mon 01. Jan 2018 21:01:01

Joined: Sun 31. Dec 2017 9:57:30
Posts: 11

Hello
second view
Regards

Attachments:

File comment: dignostic with pitch stick on 0%

IMG_2763.JPG [ 474.89 KiB | Viewed 796 times ]

Top

ZeXx86

Post subject: Re: Set up SPIRIT PRO

Posted: Tue 02. Jan 2018 8:27:54

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442

Thank you!

Please check in your radio that the pitch channel is going all the way from -100 to 100%. There could be some curve configured in.
The easiest way to verify it is to check SERVO menu in the radio. Then move with the Pitch stick.

Also note, that each power up, the unit is detecting centering signal. If aileron, elevator or rudder sticks are not in the center, then the center will be off for the pitch channel.
But still there is issue with the small range, so I think that it is all caused by some pitch curve in the radio.

_________________
Spirit System developer

Top

MOREAU

Post subject: Re: Set up SPIRIT PRO

Posted: Tue 02. Jan 2018 9:26:18

Joined: Sun 31. Dec 2017 9:57:30
Posts: 11

Hi,

OK
I change the configuration in my FUTABA / Model TYPE / SWASH H-1 and not SWASH HR3
Now on "SERVO" I have : 100% and -100% for pitch stick

I continue my set up

Many Thanks

Regards

Top

ZeXx86

Post subject: Re: Set up SPIRIT PRO

Posted: Tue 02. Jan 2018 9:43:18

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442

Perfect, you are welcome!

_________________
Spirit System developer

Top

MOREAU

Post subject: Re: [SOLVED] Set up SPIRIT PRO

Posted: Tue 02. Jan 2018 10:45:23

Joined: Sun 31. Dec 2017 9:57:30
Posts: 11

Hi,

last thing before to fly

after all settings on my Futaba T8FG like your "set up guide for Futaba"

On diagnostic :
Giro / normal condition 68%
Giro / SH button ON / 63% ("Rescue" appears)
Is it the right setting ? why not 60% and -60% for rescue ?

Regards

Attachments:

IMG_2776.JPG [ 579.55 KiB | Viewed 777 times ]

IMG_2775.JPG [ 628.85 KiB | Viewed 777 times ]

Top

Page 1 of 1

[ 8 posts ]

Board index » English » HELI » Support

All times are UTC + 1 hour

Who is online

Users browsing this forum: Bing [Bot] and 59 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: