|
It is currently Mon 25. Nov 2024 0:02:40
|
View unanswered posts | View active topics
| Author |
Message |
|
torro
|
 Posted: Sat 20. May 2017 14:09:03 |
|
Joined: Mon 20. Jun 2016 20:02:31
Posts: 46
|
|
Same problem here.
also with an hobbywing platinum 60A v4.
spirit is comletely dead. the status led doesn´t flash up after power up.
it worked in the last helicopter without issues.
tried 2 different voltage supplies.
where do i have to send the spirit?
is there a problem with spirit and hw platinum?
greets, flo
|
|
| Top |
|
 |
|
ZeXx86
|
Posted: Sat 20. May 2017 14:36:37 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Hello,
can you please describe what you have exactly did before it happened?
There may be a different reasons why the unit could appear dead.
So with your description it will help us to find what is wrong and what is a proper solution.
_________________
Spirit System developer
|
|
| Top |
|
|
|
torro
|
Posted: Sat 20. May 2017 15:17:03 |
|
Joined: Mon 20. Jun 2016 20:02:31
Posts: 46
|
|
ok.
ESC telemtry wired like shown in wiki (platinum 60A V4)
ESC @ AUX1
Jeti cable +/- @ RUD
Jeti signal @ AIL
ESC rpm @ PIT
USB interface @ SYS
i switched the ESC to the receiver and could calibrate the throttle range, so the receiver was powered.
spirit´s LED stays dark, no matter if the ESC is plugged to the receiver or spirit
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Sat 20. May 2017 15:39:29 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Thank you for the details.
But did the unit worked previously in any other configuration?
Are you using our Telem UNI cable?
First, I recommend to unplug everything except ESC from the unit. This will tell us if something is wrong with the unit.
_________________
Spirit System developer
|
|
| Top |
|
|
|
torro
|
Posted: Sat 20. May 2017 15:51:37 |
|
Joined: Mon 20. Jun 2016 20:02:31
Posts: 46
|
|
no, it´s not the original tele uni cable. it´s a spektrum satelite cable. BUT i switched the pins in the self-crimped servo-connector like shown on wiki.
the unit worked before in another heli, without issues. but there was no ESC telemetry.
i tested it without anything. just a small bec with 6V to power up the spirit. unfortunately the LEDs does nothing...
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Sat 20. May 2017 16:09:12 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Thank you.
Did you pulled off the red wire from the ESC telemetry cable?
It is very important to not connect the red wire at all (at least on one side of the cable) if you are using Spektrum Adapter cable.
_________________
Spirit System developer
|
|
| Top |
|
|
|
torro
|
Posted: Sat 20. May 2017 16:16:53 |
|
Joined: Mon 20. Jun 2016 20:02:31
Posts: 46
|
|
Failure found...
Is it repairable?
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Sat 20. May 2017 16:30:42 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Ah, that is sad.
Fortunately we can repair any unit, usually in one day. You can just ship it to us and we will fix it immediately.
_________________
Spirit System developer
|
|
| Top |
|
|
|
torro
|
Posted: Sat 20. May 2017 16:34:15 |
|
Joined: Mon 20. Jun 2016 20:02:31
Posts: 46
|
|
Ok, Thanks a Lot.
Is it the adress shown on the Homepage?
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Sat 20. May 2017 16:44:01 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Yes, also on the white Spirit box.
_________________
Spirit System developer
|
|
| Top |
|
|
 |
Who is online |
 |
Users browsing this forum: Bing [Bot] and 48 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
