It is currently Sun 24. Nov 2024 11:47:42

View unanswered posts | View active topics


Board index » English » HELI » Support

All times are UTC + 1 hour





Post new topic Reply to topic  Page 1 of 3
  [ 26 posts ]  Go to page 1, 2, 3  Next
  Print view Previous topic | Next topic 
Author Message
stipsi
PostPosted: Fri 10. Mar 2017 17:39:10 
Offline

Joined: Fri 10. Mar 2017 17:27:00
Posts: 36
Hello

What is the meaning of the red button in sensor testing?
Does it have to be red or green when Gov is active?

Thanks


Attachments:
1Spirit.jpg
1Spirit.jpg [ 134.13 KiB | Viewed 929 times ]
Top
 Profile  
 
Dn_Spirit
PostPosted: Mon 13. Mar 2017 11:23:48 
Offline

Joined: Tue 01. Dec 2015 8:59:45
Posts: 13
Hello,

this button is normally red, but when RPM sensor is connected and signal is High then it will change color. When RPM signal (voltage level) is low then color is changed to white (Status - Inactive)

Depending on the signal, you might see changes even during motor rotation by hand.
Top
 Profile  
 
stipsi
PostPosted: Mon 13. Mar 2017 20:13:30 
Offline

Joined: Fri 10. Mar 2017 17:27:00
Posts: 36
Ok, thanks.
Top
 Profile  
 
jgiannakas
PostPosted: Mon 13. Mar 2017 20:15:33 
Offline

Joined: Sat 02. Jan 2016 12:17:50
Posts: 183
So I tried this on the goblin 500 with HW 100a v3 rpm out and while the RPM reads properly the indicator stays grey! Software bug or do I have a problem?
Top
 Profile  
 
ZeXx86
PostPosted: Mon 13. Mar 2017 20:30:47 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Some sensors are outputting the high/low level as a tiny spikes, so the software may be not able to check fast enough that the signal was high/low.
Probably we will update it little bit so it will be well visible in any case.

_________________
Spirit System developer
Top
 Profile  
 
stipsi
PostPosted: Mon 13. Mar 2017 21:18:33 
Offline

Joined: Fri 10. Mar 2017 17:27:00
Posts: 36
Oh that would be fine, thanks!
Top
 Profile  
 
FrankFuss
PostPosted: Wed 15. Mar 2017 16:23:02 
Offline

Joined: Tue 17. Mar 2015 3:10:20
Posts: 113
ZeXx86 wrote:
Some sensors are outputting the high/low level as a tiny spikes, so the software may be not able to check fast enough that the signal was high/low.
Probably we will update it little bit so it will be well visible in any case.

Is the sampling rate the same on the Spirit and Spirit Pro?
Top
 Profile  
 
ZeXx86
PostPosted: Wed 15. Mar 2017 18:27:06 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Yes, completely same.

_________________
Spirit System developer
Top
 Profile  
 
sheva99
PostPosted: Wed 29. Mar 2017 14:59:01 
Offline

Joined: Tue 07. Jun 2016 1:45:00
Posts: 40
When are you going to fix this problem?
Top
 Profile  
 
ZeXx86
PostPosted: Wed 29. Mar 2017 17:25:39 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hello.
With the upcoming update.

_________________
Spirit System developer
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 3
  [ 26 posts ]  Go to page 1, 2, 3  Next

Board index » English » HELI » Support

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 47 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .