It is currently Fri 22. Nov 2024 7:26:52

All times are UTC + 1 hour





Post new topic Reply to topic  [ 92 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7 ... 10  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 09. Mar 2017 21:07:11 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Here is some next photo from testing :)


Attachments:
20170309_161159.jpg
20170309_161159.jpg [ 3.25 MiB | Viewed 1117 times ]

_________________
Spirit System developer
Top
 Profile  
 
PostPosted: Thu 09. Mar 2017 21:39:32 
Offline

Joined: Tue 15. Sep 2015 1:16:16
Posts: 28
Could you show how the wire will be plugged for HW in the FBL right now?


Top
 Profile  
 
PostPosted: Thu 09. Mar 2017 21:47:23 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Yes, you will need one cable that is connected from the programming port to the primary Spektrum connector.


Attachments:
20170309_140815.jpg
20170309_140815.jpg [ 1.63 MiB | Viewed 1109 times ]

_________________
Spirit System developer
Top
 Profile  
 
PostPosted: Thu 09. Mar 2017 22:28:23 
Offline

Joined: Tue 15. Sep 2015 1:16:16
Posts: 28
ZeXx86 wrote:
Yes, you will need one cable that is connected from the programming port to the primary Spektrum connector.


Thanks, this is not what I'd expected, I thought the ELE port was used.

I put mine in the frame of my 450L so this port is not accessible.

Don't worry, I'll find a workaround. ;)


Top
 Profile  
 
PostPosted: Fri 10. Mar 2017 8:49:49 
Offline

Joined: Mon 21. Dec 2015 9:13:42
Posts: 15
ZeXx86 wrote:
Yes, you will need one cable that is connected from the programming port to the primary Spektrum connector.


Hello Thomas

is it the same for CC ?
And does it mean that we have to use only Pro ?

Thanks


Top
 Profile  
 
PostPosted: Fri 10. Mar 2017 8:54:15 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hello,

no, for CC it is different. CC is transmitting all the data by the throttle signal. So there will be no additional cable.
For CC there is only small modification required (adding 10kOhm pull up resistor).

It will be supported by all Spirit units.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sat 11. Mar 2017 13:07:00 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Now we have also full support for Scorpion Tribunus :) Guys from Scorpion are very nice.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sat 11. Mar 2017 13:48:44 
Offline

Joined: Tue 15. Sep 2015 1:16:16
Posts: 28
I completed the wiring of my 2 heli with Spirit, I am going to be ready. :D

The 450 L mod was not so complicated


Attachments:
IMG_20170311_073346.jpg
IMG_20170311_073346.jpg [ 1.29 MiB | Viewed 1059 times ]
Top
 Profile  
 
PostPosted: Sat 11. Mar 2017 20:56:48 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Good job :)

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Tue 14. Mar 2017 21:56:17 
Offline

Joined: Thu 14. Jan 2016 23:25:16
Posts: 12
Does this mean that all telemetry at isn't Castle Creations is going to use the spektrum port on the side? What happens if you are using spektrum RXs?

I would have figured you would use the ELE signal wire because PIT is used for RPM sensor and AIL is used for Jeti. Maybe the GPIO attached to ELE can't get the data for some reason.

Also, does the telemetry tax the non-pro hardware? On the brain, they couldn't add the telemetry until they upgraded to the brain2 hardware and I would like to know how much CPU is left over in the original spirit.

The reason I ask is because I'm debating on buying a spirit or spirit pro for my next project, and the spirit is cheaper, and if the extra CPU isn't needed then no reason to buy the pro as I don't need the ports because I'm not using spektrum. I abandoned that mess long ago.

Flying season is soon, are we looking at a few months or weeks for this release? I know that you can't give specific dates, but it looks like it's close.

Thanks,
schu


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 92 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7 ... 10  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .