Spirit System • View topic - Help wiring my Kosmik 160hv

It is currently Sun 24. Nov 2024 0:55:03

View unanswered posts | View active topics

Board index » English » HELI » Support

All times are UTC + 1 hour

Help wiring my Kosmik 160hv

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

Demetrius

Post subject: Help wiring my Kosmik 160hv

Posted: Sun 30. Oct 2016 0:27:51

Joined: Wed 21. Sep 2016 23:33:00
Posts: 1
Location: Virginia Beach, Va

Okay, I have a kosmik 160hv set to 8v and I want to run a buffer pack from the slave channel to keep it charged. I don't have the pro version,so I have to use a y adapter but where do I put it? I don't have an open spot on the Spirit, do I put the y adapter at the esc port? Or where, any help you all can give is appreciated? Thanks

Top

ZeXx86

Post subject: Re: Help wiring my Kosmik 160hv

Posted: Thu 03. Nov 2016 13:55:53

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442

Hello,

sorry for late response.

You can put buffer pack to your receiver if there is a free slot.
Alternatively you can use Y-cable such as this:
https://www.conrad.de/de/servo-y-kabel- ... 08394.html

You can connect it to the RUD port where it can feed servos well.

_________________
Spirit System developer

Top

Page 1 of 1

[ 2 posts ]

Board index » English » HELI » Support

All times are UTC + 1 hour

Who is online

Users browsing this forum: No registered users and 68 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: