It is currently Sat 23. Nov 2024 19:40:18

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 12. Jul 2016 20:18:03 
Offline

Joined: Sat 18. Apr 2015 13:38:12
Posts: 7
Hi there,
Can anybody give me a pointer on how to use bank switching? I know what it does but I can't work out how you get it activated and how you switch with a tx.
And how do you copy the first setup bank to all other banks etc.

I'm also not sure how to activate the rescue functions and how this is switched, I think it is by inverting the gain on the rudder but not sure how you get rate mode if this is the case

My radio is a jeti ds16 connection is via exbus single wire, mixing and switches are not a problem, but I just can't seem to get it to work on the setup screens.

Any help would be good and appreciated.

Busher


Top
 Profile  
 
PostPosted: Tue 12. Jul 2016 20:53:11 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
The key is probably the fact that when you are connected to the software you cannot actually switch banks from the TX, you need to use the listbox in the software.

You can check if you setted it up correctly though, by looking at the indicator in the Diagnostic screen which will react to the TX switch anyway.

_________________
Oxy 2X-VertWarp 360Blade 450XBlade 450X NightflyerGoblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQXLadyMQXnano QXnano QX FPVInductrixDX8 G1


Top
 Profile  
 
PostPosted: Tue 12. Jul 2016 21:51:36 
Offline

Joined: Sat 18. Apr 2015 13:38:12
Posts: 7
Thanks that's a big help, I now know it reacts and is switching banks. Couldn't work out why it didn't switch via the tx when in setup.

Could you advise how I get the zero bank copied to all other banks, I can't find the copy to all banks option?

And the rescue function is it activated by inverting the gyro channel from heading hold to negative hf notation?

Thanks


Top
 Profile  
 
PostPosted: Tue 12. Jul 2016 22:09:16 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
There's not a feature to copy one bank to the others, although it happens the very first time you assign the bank switching channel.

But there's a useful Bank comparison feature. In the Windows software it's on the Backup tab, it's kind of a three-dots button.

About activating Rescue (actually, activating whatever Stabi function you set for that bank) is achieved by a negative gyro channel value. Read the manual, and browse the HF Spirit forum, much much info there.

_________________
Oxy 2X-VertWarp 360Blade 450XBlade 450X NightflyerGoblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQXLadyMQXnano QXnano QX FPVInductrixDX8 G1


Top
 Profile  
 
PostPosted: Wed 13. Jul 2016 7:56:09 
Offline

Joined: Sat 18. Apr 2015 13:38:12
Posts: 7
Thanks coco66.

I will have a look on hf and gets some more info, but there is a good chance that now you have given me a few pointers i will be ok for now.

Shame about the copy all banks option but maybe there will be one in the future

Thanks


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 54 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .