Well maybe not KST in general, maybe just one of mine. I have a mix of version 1 and version 2 KST's

I wish there was an in line filter we could possibly use to guarantee that governor signal was clean, everything else is perfect.

Sent from my SM-T710 using Tapatalk

Bench testing with the H3050s shows no rpm sensor noisy logs. I'm still waiting for parts to repair mine to truelly test it

Sent from my SM-G930V using Tapatalk

If a servos is causing noise, might try to put ferrit on servo lead to filter noise source and find cause this way.
I do allways pug a low esr cap on free FBL Servo port or with Y cable on any servo to fillter noise on bec power close to servos.

Rpm Filter of 2 means allmost no filter, higher number means more filter.

_________________
Oxy4max SpiritPro + HW // SOXOS 550, SpiritPro, HW120A V4, 920KV // SOXOS 600, SpiritPro, HW160A, Pyro650 // SOXOS Strike7, SpiritPro, HW160A, Pyro750 // Skywing Spirit Aero // FrSky Horus X10S + Taranis X7 /

A problem has been found with at least the v4 60a version.

_________________
[b]-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro

Im using the hobbywing phase sensor.

Sent from my SM-G930V using Tapatalk

Im using all the ports. Where would you recommend a cap?
Ive never used caps before what V and uF?

Sent from my SM-G930V using Tapatalk

I use 10V 2200uF low ERS Typ Capacitor like UPW1A222MHD:
http://eu.mouser.com/ProductDetail/Nich ... 1CXaltM%3d

If you can solder yourself, just take old Servocable and solder black to - and red to +.
Plug it to free port or use Y Cable on any TS Servo and plug Capacitor to it as well.
http://www.freakware.de/shop/abilder/spm1600.jpg

I guess any RC Store have such protectors, like HK sells them as well.
http://www.hobbyking.com/hobbyking/stor ... URN-VP.jpg

_________________
Oxy4max SpiritPro + HW // SOXOS 550, SpiritPro, HW120A V4, 920KV // SOXOS 600, SpiritPro, HW160A, Pyro650 // SOXOS Strike7, SpiritPro, HW160A, Pyro750 // Skywing Spirit Aero // FrSky Horus X10S + Taranis X7 /

Great. Thank you. Ill get one ordered up.

This is going to be one advanced oxy 3[WINKING FACE]


Sent from my SM-G930V using Tapatalk

So i flew my oxy with the h3050s and still have dirty rpm signal. I'm going to try the capacitor next. If that doesn't work, I'm giving up

Sent from my SM-T710 using Tapatalk

The problem is in the hobbywing v4, it's confirmed.

_________________
[b]-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro