So I have an oxy 3 with 140t main gear and 10t motor pinion. The software only allows me to go to 12.7 ratio but I really need 14. Is this a limitation or can we get to 14 with a software change?

Sent from my SM-G930V using Tapatalk

Previously there were same questions about this issue with solution. I will try to find it.

_________________
Spirit System developer

Have a look at this:
viewtopic.php?f=20&t=1162&view=next

If I understand it correct, by doubling sensing divider and halving gear ratio, you should end up with same rpm.

Motor field rpm = rpm * GearRatio * SensingDivider = rpm * GearRatio/2 * SensingDivider*2

I hope higher gear ration will be introduced in next minor release.

_________________
Oxy4max SpiritPro + HW // SOXOS 550, SpiritPro, HW120A V4, 920KV // SOXOS 600, SpiritPro, HW160A, Pyro650 // SOXOS Strike7, SpiritPro, HW160A, Pyro750 // Skywing Spirit Aero // FrSky Horus X10S + Taranis X7 /

Cool I'll try it out. Thank you.

Sent from my SM-G930V using Tapatalk

That did the trick. Thank you.

Sent from my SM-G930V using Tapatalk

your welcome, Adrian

_________________
Oxy4max SpiritPro + HW // SOXOS 550, SpiritPro, HW120A V4, 920KV // SOXOS 600, SpiritPro, HW160A, Pyro650 // SOXOS Strike7, SpiritPro, HW160A, Pyro750 // Skywing Spirit Aero // FrSky Horus X10S + Taranis X7 /