|
It is currently Sat 23. Nov 2024 12:16:45
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 9 posts ] |
|
| Author |
Message |
|
Rcpassa
|
 Posted: Fri 19. Feb 2016 23:57:40 |
|
Joined: Thu 15. Oct 2015 1:41:38
Posts: 55
|
|
What should this setting be for help with a 3 headed blade? 60?
|
|
| Top |
|
 |
|
ZeXx86
|
Posted: Sat 20. Feb 2016 0:05:55 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
For many multirotor heads cyclic phase is 0°, because phasing is done mechanically.
So you have to check what your rotor head require to operate correctly.
Manufacturer of the rotor head should tell you all the details.
_________________
Spirit System developer
|
|
| Top |
|
|
|
Adrian
|
Posted: Sat 20. Feb 2016 14:57:54 |
|
Joined: Thu 08. Oct 2015 14:43:12
Posts: 204
Location: Switzerland
|
Have a look on my explanation to find right phase: viewtopic.php?p=13481#p13481
_________________
Oxy4max SpiritPro + HW // SOXOS 550, SpiritPro, HW120A V4, 920KV // SOXOS 600, SpiritPro, HW160A, Pyro650 // SOXOS Strike7, SpiritPro, HW160A, Pyro750 // Skywing Spirit Aero // FrSky Horus X10S + Taranis X7 /
|
|
| Top |
|
|
|
Rcpassa
|
Posted: Sun 21. Feb 2016 0:19:52 |
|
Joined: Thu 15. Oct 2015 1:41:38
Posts: 55
|
|
What would the cyclic phase setting need to be on a goblin 380 three bladed heli or a oxy3 Qube?
|
|
| Top |
|
|
|
Coco66
|
Posted: Mon 22. Feb 2016 19:57:32 |
|
Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
|
|
AFAIK, both manufacturers specify that to go from their two blades head to their three blades head the only needed change is to reduce the cyclic gain.
_________________
Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1
|
|
| Top |
|
|
|
Rcpassa
|
Posted: Mon 22. Feb 2016 22:04:54 |
|
Joined: Thu 15. Oct 2015 1:41:38
Posts: 55
|
|
it seems ambiguous with the spirit flybarless
|
|
| Top |
|
|
|
Coco66
|
Posted: Mon 22. Feb 2016 22:11:24 |
|
Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
|
|
Where did you see any ambiguos note?
The FBL has nothing to do differently than with a two blades head, if everything has been done mechanically... why should Spirit be different?
_________________
Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1
|
|
| Top |
|
|
|
Rcpassa
|
Posted: Mon 22. Feb 2016 22:23:57 |
|
Joined: Thu 15. Oct 2015 1:41:38
Posts: 55
|
|
it ambiguous because tomas has mentioned that in some cases it doesn't need to be lowered with three blades...
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Mon 22. Feb 2016 22:37:24 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Spirit has adaptive regulation that is able to tune itself to a certain degree. So this is reason, why it can fly well with the same cyclic gain.
But generally you have to lower the gain. So everything is true.
_________________
Spirit System developer
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 9 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 49 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
