It is currently Sat 23. Nov 2024 9:40:50

View unanswered posts | View active topics


Board index » English » HELI » Support

All times are UTC + 1 hour





Post new topic Reply to topic  Page 2 of 3
  [ 22 posts ]  Go to page Previous  1, 2, 3  Next
  Print view Previous topic | Next topic 
Author Message
Coco66
PostPosted: Mon 05. Oct 2015 18:14:38 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
Badger1666 wrote:
thanks ,so there is no point in having acro mode rescue now then if normal mode corrects your inverted mistakes


Good point. Kinda true. Now Normal mode has the best of the two worlds ))))

_________________
Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1
Top
 Profile  
 
Coco66
PostPosted: Mon 05. Oct 2015 18:17:00 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
MyRCode wrote:
Any one know the delay for the flip when in normal mode? I have rescue set to acro but want to try the normal rescue + flip. I've got it on a momentary switch so I'm curious to know how long I need to hold it down.


1.3.1 introduced a new parameter to set that delay.

It's only visible in the software when you select Rescue Normal. I tried 1.0 sec, then decided for 0.5 secs.

_________________
Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1
Top
 Profile  
 
MyRCode
PostPosted: Mon 05. Oct 2015 18:35:22 
Offline

Joined: Sun 06. Sep 2015 20:16:44
Posts: 36
Badger1666 wrote:
just push and hold until it flips, the time until it flips is what you set it to.


MyRCode wrote:
Coco66 wrote:
No.
Normal mode will level to inverted if it's faster, climb up for the set time, then flip skids down and keep climbing until turned off.
Normal mode when leveling to normal and Acro mode are both unchanged.


Any one know the delay for the flip when in normal mode? I have rescue set to acro but want to try the normal rescue + flip. I've got it on a momentary switch so I'm curious to know how long I need to hold it down.


Ah...mis-read the previous post.
Top
 Profile  
 
MyRCode
PostPosted: Mon 05. Oct 2015 22:06:09 
Offline

Joined: Sun 06. Sep 2015 20:16:44
Posts: 36
Just tested it at lunch today! That flip is fast! I like the adjustable setting. I'm quite happy switching from BD3SX. :D
Top
 Profile  
 
Hakan
PostPosted: Mon 05. Oct 2015 22:20:30 
Offline

Joined: Thu 27. Aug 2015 9:59:56
Posts: 4
Tested with my trex 450 with 0.5 sec delay. Wow this is great. Lift and flip.
I used sequencing before, but this is much better. Thanks for quick response, 1.5 sec was too much for this small bird.
Top
 Profile  
 
kramrle
PostPosted: Mon 05. Oct 2015 22:23:25 
Offline
User avatar

Joined: Sun 04. Oct 2015 19:44:54
Posts: 26
Imho it would be nice to be able to tune / adjust the flip rate or leveling rate as well, depending on the user preference.
I found it a convieniet parameter on the BeastX Pro to make the flips less hard.
Top
 Profile  
 
kmaluo
PostPosted: Tue 06. Oct 2015 1:58:17 
Offline

Joined: Wed 24. Jun 2015 21:36:20
Posts: 74
kramrle wrote:
Imho it would be nice to be able to tune / adjust the flip rate or leveling rate as well, depending on the user preference.
I found it a convieniet parameter on the BeastX Pro to make the flips less hard.

I agree. Then it would be perfect.

Sent from my SM-N910T using Tapatalk
Top
 Profile  
 
Hakan
PostPosted: Tue 06. Oct 2015 6:40:58 
Offline

Joined: Thu 27. Aug 2015 9:59:56
Posts: 4
As far as I understand, the rescue flipping rate depends on the cyclic ring. When flipping max elevator/aileron allowed by the cyclic ring is used. With a large cyclic ring the flipping can be violently fast.

This is not ideal, I want a large cyclic ring to give space to legit 3d manouevers but need to reduce to not tear the heli apart in rescue flipping. It is some time ago now but I think I have the cyclic ring around 15-18 degrees now but the mechanics allow well over 20 on the 450. On my large helis there is a better agreement with what the mechanics allow and acceptable flip rate.

I agree that this is not ideal and a more obvious way of setting the rescue flip rate would be nice to have.
Top
 Profile  
 
buttles
PostPosted: Tue 06. Oct 2015 7:15:17 
Offline

Joined: Tue 16. Jun 2015 14:37:10
Posts: 156
''but need to reduce to not tear the heli apart in rescue '

I have seen one tail strike and one battery come loose due to the 'flip rate'.
+1 for an adjustable setting for this rather than lower cyclic ring.
Thanks Tomas in advance!!!
Top
 Profile  
 
Coco66
PostPosted: Tue 06. Oct 2015 8:47:43 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
+1 to be able to configure that one too. Even Neuron has it ))))))))))

_________________
Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 3
  [ 22 posts ]  Go to page Previous  1, 2, 3  Next

Board index » English » HELI » Support

All times are UTC + 1 hour


Who is online

Users browsing this forum: Google [Bot], Mattes61 and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .