Sorry, but may be that a beginner will try inverted flight with a safe altitude, so no need to climb during 1,5 s before recovering the héli ? At worst, the heli will be too high during the recovery, and a beginner may lose the orientation of his heli, especially with small heli like 450.

Il you want to try inverted flight near to the ground, rescue in acro mode is better.

It is constructive criticism, not denigration !

_________________
Logo 600 sx spirit, Diabolo 700 spirit pro, Jeti DS 14.

France.

+1 for a submenu in which we can trim the time before recovering from inverted to skid down.

Oh yes, +1 here too

_________________
Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1

Yes, we will add new parameter to the settings so it can be configured.

_________________
Spirit System developer

+1

Did two packs today with the new firmware.
I can understand the idea why this is done.
The guys with programmable radios can change behaviour how they want.
However if it's fixed in Spirit firmware, users can not.

For small helis 0 (=old style) or 0.5 Seconds would be perfect.
Otherwise they are sky high before the skids are down.
Not something beginners would like.

I hope this small change can be done quickly with for example v1.3.1 firmware.

Thanks!

That's me, except I am practising inverted with an even smaller heli - a 300 size.

Thank you Tomas for making the change.

+1 for a submenu in which we can trim the time before recovering from inverted to skid down.

We have released 1.3.1 right now, where you can configure this exactly as you wish.

_________________
Spirit System developer

Already done ????


I downloaded the 1.3.1 software and went to the stabi page to see if it was true... (sorry... ) and yes, there is a new setting between 0 and 3 s now

Thank you very much !

_________________
Logo 600 sx spirit, Diabolo 700 spirit pro, Jeti DS 14.

France.