It is currently Sat 23. Nov 2024 0:55:05

View unanswered posts | View active topics


Board index » English » HELI » Support

All times are UTC + 1 hour





Post new topic Reply to topic  Page 1 of 2
  [ 13 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
mallen
 Post subject: Rsat2 connection
PostPosted: Fri 12. Jun 2015 21:23:09 
Offline

Joined: Tue 02. Jun 2015 22:14:11
Posts: 5
Can I just check I understand this correctly?

To run UDI with a Jeti Rsat2 I connect to the EXT port but Jeti instruct not to add power to EXT.
I don't want to damage the RX.

"Connect the unit with special cable - you can made it yourself with included ELE/PIT/AIL cable in few seconds (check attachment).
One end of the cable should be connected directly to the EXT port. Opposite end has two connectors. One with power supply wires (RUD port) and one with signal wire only (ELE/PIT/AIL port, respectively AIL pin)."

Mark.
Top
 Profile  
 
ZeXx86
 Post subject: Re: Rsat2 connection
PostPosted: Fri 12. Jun 2015 22:56:16 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
EXT connector is used for EX Bus connection or telemetry sensor, not UDI.

You have copied phrase from EX Bus connection that allows integration with the unit and JETI transmitter.
UDI is different connection type that does not allow it, but connection is easier - just normal cable.

_________________
Spirit System developer
Top
 Profile  
 
mallen
 Post subject: Re: Rsat2 connection
PostPosted: Tue 14. Jul 2015 21:29:27 
Offline

Joined: Tue 02. Jun 2015 22:14:11
Posts: 5
Yes, I found the different information very confusing but got there in the end.

Flew my 600 pro at the weekend with basic settings and only changed the flight style to 7 which suited my flying and felt more like the Vbar I removed.

Have to say, the heli was rock solid and very smooth, I'm very pleased with how it flies and the ability to quickly change settings without a laptop at the field.

Big thumbs up from me. :D

Mark
Top
 Profile  
 
buttles
 Post subject: Re: Rsat2 connection
PostPosted: Wed 15. Jul 2015 6:56:00 
Offline

Joined: Tue 16. Jun 2015 14:37:10
Posts: 156
Mark, from reading between the lines I assume you are now using Exbus? Have you checked your Failsafe? Known issue at the moment with Exbus and Spirit.
Top
 Profile  
 
ZeXx86
 Post subject: Re: Rsat2 connection
PostPosted: Wed 15. Jul 2015 7:25:18 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Thank you very much for the info!

_________________
Spirit System developer
Top
 Profile  
 
mallen
 Post subject: Re: Rsat2 connection
PostPosted: Wed 15. Jul 2015 22:20:55 
Offline

Joined: Tue 02. Jun 2015 22:14:11
Posts: 5
buttles wrote:
Mark, from reading between the lines I assume you are now using Exbus? Have you checked your Failsafe? Known issue at the moment with Exbus and Spirit.


Correct I have test flown this with Exbus and failsafe did not cut the motor. Will be changing this for future flights until a fix is available now that I know it flies well. Hope something comes soon.
Top
 Profile  
 
ZeXx86
 Post subject: Re: Rsat2 connection
PostPosted: Wed 15. Jul 2015 22:44:10 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Small update to address the issue will be released this weekend :)

_________________
Spirit System developer
Top
 Profile  
 
mallen
 Post subject: Re: Rsat2 connection
PostPosted: Thu 16. Jul 2015 20:40:52 
Offline

Joined: Tue 02. Jun 2015 22:14:11
Posts: 5
That would be fantastic, I will hold off changing anything.
Top
 Profile  
 
SJo1
 Post subject: Re: Rsat2 connection
PostPosted: Sun 19. Jul 2015 19:46:37 
Offline

Joined: Fri 10. Jul 2015 22:59:33
Posts: 3
Hi Tomáš,
I found that new fw 1.2.1 was released, but changelog hasn't updated?
Could You please chime what fixes this new minor update contains:)

Regards
Sami


Last edited by SJo1 on Sun 19. Jul 2015 19:50:07, edited 1 time in total.

Top
 Profile  
 
ZeXx86
 Post subject: Re: Rsat2 connection
PostPosted: Sun 19. Jul 2015 19:47:37 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
Hi,

you can find changelog here on the forum in News/Version 1.2.0 released and also in the software after updating to the latest version.

_________________
Spirit System developer
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 13 posts ]  Go to page 1, 2  Next

Board index » English » HELI » Support

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 51 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .